Autel IM508/ IM608PRO is good at Programming Volvo before year 2018 AKL.
This article is a review of Autel IM608 PRO on Volvo:
2018 VOLVO V40 all key lost by OBD
Autel IM608 no problem
Take a look at the process.
Go to IMMO>>Volvo>>Automatic selection
Vehicle info.


Select  Semi-smart key>>Immo status scan
Select “All Key Lost”.
Turn off Bluetooth, connect VCI.
Key info.
Clear all keys.
Insert new key into slot to learn it.
Turn off ignition, remove newly-added key.
Done!

Car starts and remote works.


Done! 2018 Volvo V40 AKL Programming by OBD using IM608 PRO Tablet No Problem

 

I use this device to program keys witch it's working perfectly, also it's good for diagnostic too. this is the second my Autel scanner, the first one it is Autel elite pro.

Received very quickly, all parts of the kit as in the description from the seller. There was a small problem with registration, the seller helped to settle everything very quickly. Everything works fine after the update. I am very satisfied with the purchase and recommend the seller. I will tell you about the functionality of the device later.

It mainly advertised as a key programming scanner, but it is way more than that. So plus programming almost all keys and key fobs for any car, it can read and write on EEPROM chips which allows you to reset hard Airbag codes, plus it has full diagnostic functionality in all 10 modes of the OBD2. I have the Autel Ultra as well but I almost always reach the IM 608 pro for diagnostic as well as programming.

Used this tool to program key for 08 Acura TSX with no issues took 5 minutes, I bought the tool because it comes with a j box and you can program modules and ECM's, etc with a laptop and manufacturer's software you don't use tool for that but the J box. Just didn't realize you need to be a computer guy to do so. This tool can do almost anything you just need to know what you are doing. I'll be doing my research to further expand my knowledge of computer software.

I purchased the Autel IM608 to program keys, and to act as my primary scan tool at both my full-time fleet job and my side business. When it first arrived I was extremely impressed with its build quality and feel, and the intuitiveness of the software. I was able to set up an account and access all the available updates within about ten minutes. Then I tried it out on both my personal cars and was very happy with how easy it was to access all the different modules, and how quickly it communicated with the vehicles. I'm used to using the Chrysler/FCA wiTech factory scan tool, and the Autel IM608 emulates it almost perfectly.

Everything about the product is great.The customer service is fast to respond for help and the item is shipped in factory conditions.

Product was a lot easier to use than I expected. And it was beyond expectations with the amount of features

Used this tool to program key for 08 acura tsx with no issues took 5 minutes, i bought the tool because it comes with a j box and you can program modules and ecm's etc with a laptop and manufacturer's software you don't use tool for that but the j box. Just didn't realize you need to be a computer guy to do so. This tool can do almost anything you just need to know what you are doing. I'll be doing my research to farther expand my knowledge on computer software

I want to Share my working experience on a 2022 Toyota Rav4 USA model.

2022 Toyota Rav 4, USA, Add Smart key. He has a working key to start the vehicle. The new key was a brand new OEM smart key.

First try the UHS Toyota bypass cable, by connecting G box right into the smart box. But did not get any communication.

Second attempt: He then notice that the Autel IM608 had an update for Toyota dated Dec 19th 2022. He performed the updates noticed that after the update it said Back Up IMMO date via OBD, or VIA G-box , he tried G box again and No luck, keep saying no communication to check cable turn off Bluetooth check power etc.

Third attempt: Pulled out the IM508 /KM100 so it will have a straight connection, still no luck

Last try: So he put it all back together and then decided to try to back up IMMO via OBD. G box Was not needed. Connect right into OBD 2 port. It did back up the data, So went into key learning, follow the steps, it asked if back up, clicked yes, and it went into learning mode. And successfully learn a New key via OBD II without doing a In-code or out-code, or any Password, or paying any $30 fee. (You would typically need a in-code & out-code password, just to add a key fob, and would need to pay $30 for the third party service. But this time does not need.)

The new update says in the update that it supports up to 2017. But still worth trying.

The IM608 is global version. so you can use it in your country without problem I wanted thank you for the good purchase of the product.

So far it has performed flawlessly, run fast, easy setup

Very Satisfied with this tool! Great product works amazing! Everything I expected hands down.