EIS/ELV Test Line for Mercedes
No need have car for test
Can works together with VVDI BGA/CGDI BENZ PROGRAMMER
Benz ECU Test Adaptor Used to brush ECU.
Work with vvdi, nec57, ktag, kess v2 series, which can support CAN Protocol.
When you go other place for travelling, afraid your device does not fit the power outlet? This is not a problem, use this adapter, you can easily use all the power freely. Charger is not a problem anymore.
Lonsdor K518ISE LKE Car Smart Key Emulator 5 in 1 is the Helper of K518ISE, K518S,Supports Supports Offline Calculation, can collect data (sent from automobile ignition coil) to detect the coil fault and decode car keys.
Xhorse VVDI Prog Bosch ECU Adapter Support Read BMW ECU N20 N55 B38 ISN without Opening
Lonsdor SUPER ADP 8A/4A Adapter With Lonsdor LKE Smart Key Emulator, Buy together can save a lot, www.obdiitool.co.uk can offer you a lifetime customer service and tech support.
Double CAN Adapter for Yanhua Mini ACDP included Volvo Module 12 & JLR KVM Module 9,It was offered alone for customer who want to use JLR KVM Module 9 on old Land Rover and Jaguar Or customer whose Double CAN Adapter inside Volvo Module 12 package is missing or broken.
GODIAG GT108 Super OBDI-OBDII universal conversion adapter can convert the OBDI diagnostic interface of cars, trucks, tractors, mining vehicles, generators, boats, motorcycles, individual ECU control units, etc. into standard OBDII diagnostic interfaces through DIY wiring Interface, convenient for car maintenance personnel to connect to OBDII diagnostic programming equipment for data streams reading, fault codes diagnosis, programming, activation and coding...
OBDSTAR P002 adapter is designed for TOYOTA 8A non-smart key all keys lost programming, FORD all keys lost programming, BOSCH ECU flash and more. It is used with X300 DP Plus/ X300 PRO4/ X300 DP Key Master.
BMW CAS4 & CAS4+ Test Platform Off-site key programming can help u to programm BMW CAS4 CAS4 + key on the workbench by OBD to avoiding car power loss and data loss, it can also test whether CAS or key is working properly
When connect 2019- Ducati motorcycle Euro V or correct mileage for some Ducati models you will need this extra M041 cable. The M041 cable is compatible with MS80, MS50, iScan Ducati and Odomaster.
N004 Adapter/M004 Cable used with OBDSTAR iScan Ducati scanner, Free shipping with good quality, and we can offer you lifetime customer service and Online tech support.
Adapters for CG AT200 No Need Disassembly Operation, used with CG AT200 Programmer.
The ENET adapter with WiFi and USB interface is a diagnostic/ coding/ flashing Ethernet adapter for BMW. It is Compatible with E-SY-S, BimmerCode, Bootmod3, Ethernet, ISTA D, MHD, xHP Flashtool, xDelete, THOR-the M Flasher, BimmerGeeks Pro-Tool, etc. So you can use a variety of diagnostic software via this adapter.
Yanhua genuine solderless puncture socket supports all standard 8-pin IC (FEM/BDC 8-pin chip) reading and writing data, with simple installation and non-damage operation. Assorted with high-quality 8pin cable and adapter board, compatible with other programmers. No soldering, no risk!
OBDSTAR Toyota-30 cable Work with X300 DP PLUS/ X300 PRO4/ X300 DP Key Maste, it is mainly used for all keys lost and password-free matching operation of 8A-BA and 4A models of Toyota, it is latest smart key box with 30 pins, there is no need to break, hook, or plug and unplug wires during operation.