OBDSTAR TCM-002 DQ250 02E/0D9 Clone Cable, Used with OBDSTAR DC706 ECU Tool, Comes with quality guarantee for all have passed quality control before delivery
Yanhua Mini ACDP module 29 with ICP mode to read data without soldering, Support add key and all keys lost for9 Audi A6/A7/A8 and other models, the BCM2 IMMO data can be read when all keys lost, Support Audi Gen5 unencrypted version and partial encrypted version BCM2 to read immo data by OBD.
YANHUA New Special Filter Support BMW all series ID7 instrument, No need to weld the filter, the filter is docked with original car instrument plug and socket, Simple and efficient operation, safe and reliable.
VXSCAN ENET WIFI/USB DoIP Adapter is a diagnostic/ coding/ flashing Ethernet adapter for BMW, After receiving the device, you needs to connect the computer, and then contact us for the remote activation of BENZ software W223 C206 213 167 authorization.
Yanhua mini acdp module 28 Boot test point with pin detection function, data read and write safe and reliable, supports Jaguar, Land rover, Chrysler, Dodge, Fiat, Honda, Jeep and other models of the ZF-9HP gearbox boot mode cloning
OBDSTAR Nissan/Renault Sylphy 16+32 Gateway Adapter for Nissan Sylphy Sentra (Models with B18 Chassis) Key Adding and All Keys Lost without Pin Code, can Used with OBDSTAR X300 DP Plus and X300 Pro4.
Yanhua Mini ACDP Module 27 BMW MSV80 MSD8X MSV90 DME Read/Write ISN and Clone, Support BMW E/F chassis MSV80, MSD80, MSD81, MSD85, MSD87, MSV90 DME read/write ISN and clone.
OBDSTAR Airbag Reset jumper adapter can be used to connect with P004 adapter to do airbag reset with X300 DP Plus and Odomaster
This is the Xhorse XDNP45 Audi J518 Adapter used with Mini Prog and VVDI Key Tool Plus Pad to read and write mask 3L40K, 1L59W without soldering.
Full protocol OBD2 jumper cable come with GND4 GND5, compatible with programming equipment such as MPPS, FGTECH, and KESS V2, Supports standard obd2 full protocol connection
GODIAG ECU IMMO Prog AD GT105 Full protocol OBD2 universal jumper, is used to connect ECU for ECU programming via OBD2 way such as MMPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc.
GODIAG GT101 6m extension cord is used to extend the test distance of GT101 from 6m to 12m, Support the GT101’s use for trolleys, trucks, RVs, etc
The MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case.
Xhorse XDNP12GL is used to do CAS4/CAS43+ units for BMW with solder-free adapter. It is a perfect choice for users who have a job that is 50-70 miles away from a rework station.
XTOOL M821 Benz All Keys Lost Adapter is used for finishing and optimizing all key lost programming for multiple Mercedes-Benz modules, you can save as much as 65% of the calculation time on the process
Xhorse all key lost cable which works for Ford / Lincoln cars, can be used with Xhorse VVDI key tool plus, when all keys are lost and the alarm is on, not need to turn off the battery over and over again.