1.Update in real time, products updated in zero cycle time, support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine
change computer, ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.
CGDI Prog BMW Function List:
CAS Mileage Reset
BMW F Series Coding
BMW Data Modification and Verification
FEM/BDC Key Match
CAS4+ Copy Key Without Key
CAS4+ Copy Key With Key
CAS4 Copy Key With Key
CAS3+ Copy Key Without Key
CAS3+ Copy Key With Key
CAS3 Replace The N20 Engine Computer
CAS3 Replace The MSD80 Engine Computer
CAS3 Copy Key With Key & Copy Key Without Key
BMW F Series Program
BMW Enable Key
BMW Disable Key
CGDI MSV80 BMW Car Key Programmer Supported Module list:
1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version
can be directly downgraded by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5. Support BMW MSV80/MSD80/MSD85 series OBD read ISN code (no need to spilt computer when matching key)
6. Support BMW key unlock.
||Has key to match key
||Without key to match
||Read ISN code
||Replace engine computer DME
||BMW Key unkock
CGDI BMW Update Guide and Latest Software:
CGDI Prog MSV80 Software Update Guide:
Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.
CGDI Prog MSV80 Firmware Update Gudie:
Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".
CGDI BMW Sotware Update Information :
CGDI BMW New Update in June 2019
1.Add BMW E-series iDrive coding function
2. Add BMW E/F/G series diagnostic (Read and Clear DTC)
CG-DI V2.6.0 (2019.03.05)
1. Added: EWS1-3 key matching function.
2. The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.
3. The BMW data modification adds support for both N13 and N55 engine data.
Download Link: http://www.cg100iii.com/download/CGDI_Setup_V2.6.0.zip
CG-DI V2.5.0 (2019.01.10)
1. Added BMW E series programming, support single module programming of E60, E65, E70, E89, R56 and other chassis models (multimedia module requires fiber optic communication, temporarily not supported).
2. Added BMW E series code, support E60, E65, E70, E89, R56 and other chassis models single module code, backup code and recovery code.
3. FEM/BDC key matching: Add 0000155E.018_120_010, 00002419.081_010_020 two versions of FEM/BDC with key.
4. F/G system programming: increase the support of swfk, flup, blup programming files, and fix some programming failures.
5. CAS1-CAS3+ key matching: increase the Rolls-Royce CAS1, CAS2 key matching.
6. BMW data modification: Add CAS3+, CAS4+ ISN encryption and decryption functions.
7. Maserati Mileage Adjustment: Added the function of saving EEPROM data.
8. BMW F-series codding:Fix List display incomplete.
CG-DI V2.4.0 NEW(2018.12.13)
1. New: BMW data modification function: support CAS3/3+ data modification VIN, ISN, support CAS4/4+ data VIN, ISN modification, support N20 data VIN, ISN modification.
2. BMW F/G series programming: support automatic code setting after programming; repair some problems of instrument programming failure; repair some EPS programming failure problems; repair ECU list display error.
3. CAS mileage reset: fix the problem of partial version programming failure.
4. Firmware upgrade: Improve USB communication performance.
CGDI BMW Prog Test Report:
cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 - E60 2005 lost key - Obd - not working ( no option to program from dump)
Cas 3+ E87 2008 spare key - eeprom dump - ok
F10 - key from dump - OK
F10 LCI - key from dump and isn from working key - OK
F10 LCI - key from dump and isn from DDE - OK
E60 LCI - downgrade CAS3+ and key via OBD - OK