Iprog Pro is a powerful tool for car repair on airbag, dashboard, car radio, ecu, eeprom, immo, mcu and special functions. Iprog+ replace Carprog Full Digiprog III Tango.
Iprog+ Iprog Pro Odometer Correction Scanner
1. Functional: airbag, dashboard, car radio, ecu, eeprom, immo, mcu and special functions
2. Reasonable price: much more cheaper than original iprog+, but work as well as the original
The program is designed to work in the operating systems of the Windows family . The following versions are supported:
How to Install iProg Pro software:
The program is designed for use with the iProgPro programmer.
1. Create a new folder in any convenient place on the disk. For example [iProgProSoftware]
2. Unpack the archive into the created folder.
3. Run the program.
4. Select the menu item Help -> Check for Updates. Follow instructions.
5. Copy into your Scrips and Calculators folders your scripts and calculators, respectively.
More instruction, please check how to install iprog software video beside our description
The best programmer iprog Pro is designed to work with automotive microelectronics:
Working with odometers on OBDII connector
Working with odometers on the table through adapters
Work with multimedia unlocking the tape recorder
Work with keys (IMMO, Transponders), copying, preparation, unlocking
Work with IMMO-Key Auto dumps
Working with the airbag computer, deleting crash data
Transfer readings from miles to km
Read and write processors and its used in cars
Removing the particulate filter in the dump
Working with keys to the intercom
Realign Pin cod from dump (some brands)
Control board number, + scripts full Base number. Ability to update!
All adapters are tested for performance!
Read and erase crash to some cars
Read and erase DTC
Write a new km
3. Car Radio & ECU:
Read and erase info
Program and copy chips for cars and truck
Cover Toyota smart keys: reset key prepare
Write a key by immo dump
Read and write chips
Cover chips Atmel, Fujitsu and microchips Motorola, NEC v850
7. Special functions:
Mile to km
Pincode from dump
1pc x iprog+ Main Unit
1pc x RFID 125 adapter
1pc x RFID 134 adapter
1pc x Mbus adapter
1pc x obd Cable
1pc x USB
1pc x cd
How to install iProg Pro V76 software on Win7
How to install Iprog+ Iprog Pro V77
Here's the step-by-step guide to install driver and software version 76 for iprog+ pro multi-function programmer.
Firstly, update Iprog+ V76 driver:
Open the CD.
Install “7z1900-32bit” (my computer is 32BIT).
Copy and paste ” iProg+_2019_00001″ to the desktop.
Right click on ” iProg+_2019_00001″, use “7-zip” to extract.
Have window message “Device (iProg+) driver software was not successfully installed“.
Right click on “Computer” -> “Manage” -> “Device Manager”;
Right click on “iProg universal programmer” and select “Update Driver software“.
Select “Browse my computer for driver software”
Select “Driver” folder”.
Click on “Install this driver software”.
Driver software was successfully updated.
Start to user Iprog+ clone V76 software, it lists several functions: Airbag, Car, Dashboard, EEPROM, MCU, others etc.
Click on “Car” and have many options incl. Car radio, DPF OFF, ECU, IMMO, Key, Mil to KM, PIN ABS, PIN Code Smartra 3, Pincode from the dump v1.0.3, Sensor, Speed Limit etc