Procedure
Connect X431 IMMO Plus to car OBD. Go to:
IMMO >> Honda >> Anti-theft key matching >> Rewrite Honda smart key

Now you can follow the prompts:
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)

Please take one original keyless access remote into the vehicle.
Do not insert the keyless access remote even if the keyless access remote slot is available.
Remove all other keyless access remotes from the vehicle.

Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

How many Honda smart keys do you want to register? One
Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)
Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button.)

Does the keyless access remote and immobilizer indicator light go off? Yes

Turn the ignition switch off.
(Don’t press the foot brake and press the engine Start/Stop button.)

Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)

The keyless function is registered too.
Since this keyless remote is united with the immobilizer key, the immobilizer key has been registered at the same time by this operation.
It is not necessary to register or delete the immobilizer key separately.

The registration has been completed.
Turn the ignition switch off.

Attention:
Check all keys to ensure each will start the engine.
Check all keys to ensure each will lock and unlock the doors.

Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch on.
(Don’t press the foot brake and press the engine Start/Stop button twice.)
Done.

Clone Jaguar/ Land Rover 8HP45 Gearbox with Launch X431 IMMO Plus/Elite Success ! 

Launch X431 IMMO Plus/Elite with “IMMO PROG” function allows you to read transponder data and generate exclusive keys, and read/write on-board EEPROM chip data and MCU/ECU chip data. X-PROG 3 is required. It’s perfect to clone Jaguar/ Land Rover 8HP45.

Devices used:

X431 IMMO Elite device (X431 IMMO Elite or X431 IMMO Plus)

DBScar VII VCI Connector

Launch X-PROG 3 immobilizer programmer kit

Other cables and adaptors in the device package

Original and new Jaguar/ Land Rover 8HP45 gearbox

Main steps:

• View Wiring Diagram
• Connect
• Backup Complete Data (EEPROM and flash data)
• Restore Complete Data (EEPROM and flash data)
• Disconnect

Turn on X431 IMMO Tablet and enter IMMO PROG function

Connect X431 IMMO Plus or X431 IMMO Elite Key Programmer and DBScar VII VCI Connector simultaneously