How to read PPD 1.5 ECU with Ktag 7.020 via BDM

---

How-to: read VAG SIEMENS SIMOS 5WS4PPD1. 5 with Ktag using BDM probe.

 

Device required:

ktag firmware 7.020 software 2.23 or above

BDM frame with probe 

 

Preparation:

BASIC CONNECTION – PINOUT FOR SIEMENS PPD 1.X ECU, USED IN VAG CARS

    6 : +12V ( term.15 )
2 :  GND ( term. 31 )
18 : +12V  ( term. 30 )
72 : K Line
89 : CAN High
66 : CAN Low

Procedure:
Step 1: Set up BDM connection
connect ecu with BDM frame follow the wiring diagram




Step 2: Read PPD 1.5 with ktag 7.020

Open Ktag ksuite 2.23 software

Select protocol SIEMENS SIMOS 5WS4PPD1. xVAG

Select Plug-in

Read and backup ecu data


Reading in process, wait until complete

Reading eeprom successfully.
Save ecu data.
Done.

 

Note: BDM100, kess v2 and Fgtech galletto v54 reads PPD1. as well.

Report:

passat 140hp bkp engine with ppd.1.5 ecu and kess v2 reads it fine.
i haven’t wrote to it but read the ecu no problem