Scania Diagnos 3 VCI3 Scanner User Manual
1.ScaniaSDP3 VCI-3 FAQ
2.How to Set Scania Diagnos 3 WiFi Connection
3.How to install Scania SDP3 2.43.1?
4.How to activate SDP3 V2.43.1?
FAQ
Q: When I install version 2.24, there is a prompt message like “
The version of SDP3 has ceased to be valid. Install the latest version of SDP3.” Can you fix it for me?
A: Please re-install the computer system, and download the software patch (.exe), then install and operate it.
Below is free download link of Scania VCI2 VCI3 SDP3 software patch:
https://mega.nz/#!ZRBihJpD!zW47J1O7PS7u4pXrfATmqMocpYY0RLNBXfiX8io-NFM
How to Set Scania Diagnos 3 WiFi Connection
Tips: You need connect the device to vehicle first
Then follow following instruction to do it:
1. Open WiFi in your laptop
2. Find out VCI3-SN7041
3. Click “connect”
4. Check IP and set it as"obtain an IP address automatically"
5. Open Scania VCI SDP3 software, choose"connect to wireless VCI" in connection menu
6. Click Connect as the picture show
7. WiFi connect successfully
How to activate SDP3 V2.43.1?
SDP3 V2.43.1 activation help will be got by pros at
https://www.obdiitool.co.uk/wholesale/scania-vci3-sdp3-truck-diagnostic-tool.html
Please send your ID to your dealer to activate.
How to install Scania SDP3 2.43.1?
Step-by-step installation guide:
Step 1: Copy the Scania SDP3 v2.43.1 file to desktop
There are 4 items in the file: incl.
SDP3 Patch
AdbeRdr920_en_US
NDP462-KB3151800-X86-X64-AIIOS-ENU
Scania Diagnose & Programmer 3 2.43.1
Step 2: install Adobe Reader 9.2
Step 3: Open “NDP462-KB3151800-X86-X64-AIIOS-ENU”to install Microsoft 4.6.2
Step 4: Install Scania Diagnos & Programmer 3 2.43.1 setup
Step 5: Run Prerequisites
If the procedure appear “access is denied” error, please copy “_prereqset64v3” to Disk [c:] and establish a new folder as “fix”
Run computer cmd to enter “C:\fix” and” _prereqset64v3” to fix the error
Restart computer
Step 6: Install SDP3 2.43.1 driver software
Go to KeyGenandFIX folder, install 64bit driver
Device driver software installed successfully. Device is ready to use.
Step 7: Activate & crack SDP3 2.40.1
Open KeyGenandFIX folder->Hardware ID Reader-> SDP3 HWID reader x86 (public)
Copy and paste hardware ID to desktop
Merge registry editor on desktop
Open Fix File 2.4.3.1 folder, copy and replace SCMM_SSK.dat and SCOMM_SSK-HL.dll file to C:/Program Files/Scania/SDP3 folder
Open Time application and press Crack
Crack sdp3 succeed.
Restart computer
Step 8: Run Software
Open SDP3 Configurator on desktop
Select software language and interface
Run SDP3 software
That’s all!