Technical Service For Autel MaxiIM IM508

---

Matched product:

Autel MaxiIM IM608 VS MaxiIM IM508 VS Auro OtoSys IM600 VS IM100
 

Product	Autel IM508	Autel IM608	AuroOtosys IM100	AuroOtosys IM600
IMMO
Smart Mode(Guided and Automated Key Learning Function)	√	√	√	√
Expert Mode(Advanced Key Learning)	√	√
Auto Detect Make/Model/Year/System	√	√	√	√
Read Pin/CS	√	√	√	√
Read Pin/CS(All Key Lost)	√	√	√	√
Key Generation	√	√
Key Learning	√	√	√	√
IMMO ECU Reset/Adaption	√	√	√	√
IMMO ECU Refresh/Coding	√	√	√	√
Remote Learning	√	√	√	√
Backup/Restore IMMO Data	√	√
Audi Q5/A4/A5 2015-2017 Read Pin/CS		√	N/A	√
BMW FEM/BDC Key Learning and Adaption		√	√	√
Mercedes Key Learning		√		√
Benz 3rd Generation IMMO Add Key,All Key Lost,Key Learning		√
BMW FEM/BDC Key Learning and ECU Adaption	√	√
BMW CAS4/3/2 Key Learning	CAS4 Available when Connected to XP400	√
VW/Audi MQB(VDO & JCI)Add Key,IMMO V A4/A5/Q5 2015+ Key Learning		√
VW/Audi/Skoda/Seat IMMO III/IV/V Add Key,All Key Lost	√	√
Programming
Key Read/ Write	√	√
EEPROM Read/ Write	√	√	√	√
MCU Read/ Write	Basic	Advanced	Basic	Advanced
ECU  Read/ Write	When Connected to XP400	√
MC9S12 Encryption Chip Read/ Write	When Connected to XP400	√
IC Card Read/ Write	When Connected to XP400	√	N/A	√
Mercedes Infrared Key Read/ Write	When Connected to XP400	√	N/A	√
Remote Frequency Detect	When Connected to XP400	√	N/A	√
Support PC	When Connected to XP400	√
OE-Level Diagnostics
All System for Over 80 Markes and Models	N/A	√	√	√
AutoVIN/ Auto Scan	√	√
Read/ Erase Codes	√	√
View, Record, Playback Live Data	√	√
View Freeze Frame Data	√	√
Shop and Data Manager Application	√	√
MaxiFlash JVCI ECU Reprogrammer(Bluetooth/ USB Cable)	N/A	√	N/A	√
Advanced Service Functions
Oil Serive Reset	√	√	√	√
Parking Brake Pad Relearn After Replacement	√	√	√	√
Steering Angle Sensor Relearn	√	√	√	√
Battery Registration and Reset	√	√	√	√
Diesel Particulate Filter Regeneration	√	√	√	√
Tire Pressure Monitoring System Sensor ID Relearn	√	√	√	√
ECU Coding	N/A	√	N/A	√
VW/Audi Component Protection			N/A	√
Complete Service Functions	N/A	√	N/A	√
Tool Features
Built-in Rechargeable Lion Battery	5000 mAh	15000 mAh	5000 mAh	15000 mAh
Internet Updatable	Wi-Fi	Wi-Fi	Wi-Fi	Wi-Fi
Multilingual Support	√	√	√	√
Touchscreen	7-Inch	10.1-Inch	7-Inch	10.1-Inch
Memory	32GB	64GBP	32GB	64GBP
Processor	Cortex-A9 Processor	Cortex A7+A15 Six-Core Processor	Quad-Core Processor	Hexa-Core Processor
Camera	N/A	8.0 Megapixel	N/A	8.0 Megapixel
Resoluton	1024×600	1920×1200	1024×600	1920×1200
Note: XP400 can be pruchased separately Some listed functions are manufacture dependent. Constantly update MaxiIM for current vehicle coverage. Update software regularly for most accurate tool features.

How to Update Autel MaxiIM IM508?
1. Make sure the Display Table is connected to power source with stable access to the Internet.
2. Tap the Update application button from the MaxiIM Job Menu or tap the update notification message when received one;or tap the Update icon on Vehicle Menu in Diagnostics application.The Update application screen displays.
3. Check all available updates:
* If you device to update all the items of IMMO software,select IMMO Tab and then tap the Update All button;if you want to update all items of diagnostic software, select Diagnose Tab and then tap the Update All button.
* If you only want to update one or some of the item(s),tap the Update button on the right colum of the specific item(s).
4. Tap the Pause buttons to suspend the updating process.Tap Continue to resume the update and the process will continue from the pause point.
5. When the updating process is completed,the firmware will be installed automatically.The version will replace the older version.

Product Display

1. 7.0" LCD Capacitive Touchscreen
2. Ambient Light Sensor - detects ambient brightness.
3. Power LED - indicates battery level & charging or system status.
4. Vehicle Communication LED - flashes green when the Display Tablet is communicating/ linking with the vehicle's system.
The power LED displays green, yellow or red depending on power level and operating state.
A. Green
* Illuminates green when the Display Tablet is charging and the battery level is above 90%. 
* Illuminates green when the Display Tablet is powered on and the battery level is above 15%.
B. Yellow
* Illuminates yellow when the Display Tablet is charging and the battery level is below 90%. 
C. Red
* Illuminates red when the Display Tablet is powered on and the battery level is below 15%.

5. Collapsible Stand – extends from the back to allow hands-free viewing of the Display Tablet.
6. Heat Sink
7. Built-in Battery

8. Mini USB OTG Port
9. Micro SD Card Slot – holds the micro SD card.
10. DB15-Pin Port – connects the main cable.
11. USB Port
12. Lock/Power Button – turns the device on & off with long press, or locks the screen with short press.

13. Vehicle Key Chip Slot – holds the vehicle key chip.
14. Vehicle Key Slot – holds the vehicle key.
15. Status LED Light – indicates the current operating status.
16. Connection Port – connects EEPROM Adaptor and EEPROM Clamp Integrated MC9S12 Cable.
17. USB Port – provides data communication and power supply.

Vehicle Key Slot
Holds the Vehicle Key to read and write vehicle key information.

Vehicle Key Chip Slot
Holds the Vehicle Key Chip to read and write vehicle key chip information.

Status LED Light
The status LED of the XP200 indicates the operating status of the device. 
See Table below for detailed description.
 

LED Light	Color/Status	Description
Power	Solid Green	Powered on and Default Status
	Flashing Green	Communication Status
	Solid Red Error Status	Error Status