XHORSE MINI PROG VS Other Programming Devices

---

Matched product:

XHORSE MINI PROG VS Other Programming Devices

Programming with traditional soldering:
Need to solder wire, complicate and time-consuming
 
Need to remove chip and cut the wire which may lead to car breakdown or data loss if you are not good at soldering
Data loss may be easily caused by solder skips 

Programming with MINI PROG:
 
No need to remove chip/solder/cut the wire/lift the pin
No need to dismantle or cut the wire with no risk of damaging PCB
Easy to use for green hands
Multi-module reading & writing
Convenience at hand with connection diagram
IMMO data reading & writing (BMW: BDC/CAS3/CAS3+/CAS4/CAS4+/FEM, BENZ: EIS/EIZ PORSCHE: BCM, LANDROVER: RFA, VOLVO: CEM/KVM)

XHORSE MINI PROG	Other Programming Devices
Connect to the smartphone via Bluetooth and WiFi. To enhance the working efficiency and reduce communication failures.	Connect to the computer via USB cable. You might easily get a vehicle breakdown due to the bad contact caused by the USB cable port.
Support reading chip data without soldering.	Solder to PCB, which may lead to car breakdown or data loss if you are not good at soldering.
No need to dismantle the device or cut the wire. A user-friendly device for both green hands and experts.	Improper dismantling or cutting may increase the risk of car breakdown.
Support pin detection and report when it detects any problems. Largely avoid data loss.	Unable to check the status of pins and data loss may be easily caused due to solder skips.
Read & write most 8-pin ic chip data via its 3 pin headers directly without adapters.	Adapter needed and you need to spend a lot on buying all types of adapters.
Support multi-module reading & writing, such as EEPROM, ECU, etc. With this device, you can solve most of problems you encounter at work.	Support reading & writing a few modules only. You need to buy many devices to satisfy the needs of work.
Support data local & cloud storage, avoiding data loss due to misoperation.	Data loss may arise due to a lack of cloud storage.
Built-in battery ensures working without USB cables, saving a lot of trouble when you work outside.	Inconvenient to work outside with USB cable.
Provide professional technical backup. Problems can be resolved on Xhorse App directly by Xhorse technicians.	You can only seek help from the product dealer.

In terms of security, the hand-held programming pen is preset with a pin detection function: before reading data, it will detect whether the pin is in normal contact, to avoid the possibility of unreadable or lost data due to unclean pin processing. Backup function of data will also be added-when the data is successfully read, the system will automatically back up the data to the memory or cloud storage according to the operating time to avoid data loss caused by the lack of backup data.

If you use the MINI Prog programming pen to read the data, the data is automatically uploaded to your cloud account. Using the VVDI MAX, you can directly read the data write start without switching the device back and forth on the computer.