EU/UK Ship 2 Years Free Update 2024 Autel MaxiCOM Ultra Lite Automotive Diagnostic Tablet Support Topology Mapping and Guided Functions Active Test 40+ Service

Extended Function:
* Work with Autel BT506, enables technicians to view the health status of vehicle's battery and electrical system. 
* Work with Autel MSOBD2KIT Non-OBDII Adapter, you can use Maxisys Ultra to work on specific vehicles produced between 1996 and 2002 without the standard OBD2 pin configuration
* Work with Autel MV108/ MV105 allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure safely and quickly.

What is the difference between Ultra Lite and Ultra?

1. The Similarity

1). Both Maxisys Ultra and MaxiCOM Ultra Lite are Global Version, No Blocking Probelm
2). Both of Them Comes With 2 Year Free Update Online. After 2 Year, Update Cost about 1099USD/ Year
3). Support Fully Same Functions including J2534 ECU Online Programming，Special Service Functions, Active Test, Guided Funtions, etc. 

2. The Differences:

1). With Different VCI:
     * Maxisys Ultra Comes with MaxiFlash VCMI 5 in 1 Which can Support VCI, OSCILLOSCOPE, MULTIMETER, WAVEFORM GENERATOR, CAN BUS CHECK
     * MaxiCOM Ultra Lite Comes with MaxiFlash VCI, So It Can Not Support OSCILLOSCOPE, MULTIMETER, WAVEFORM GENERATOR, CAN BUS CHECK
2). With Different Language Option:
     * Maxisys Ultra Support English Only. Can Not Change to Other Languages
     * MaxiCOM Ultra Lite Support Multi-Language Which Covers English, German, Spanish, French, Polish, Italian, Japanese, Korean, Dutch, Portuguese, Swedish, Russian
3). MaxiCOM Ultra Lite Can Not Support Maxi Data APP But Maxisys Ultra Can 

Autel MaxiCOM Ultra Lite Scanner Introduction

 

【Professional Diagnostics Increase Efficiency by 70%+】


DTC & Symptom Based Repair Guided Assistance, Improve Shop Repair Efficiency by 70%+

The Autel MaxiCOM Ultra Lite delivers leading-edge automotive diagnostics, repair, and calibration technologies packaged in a 12.9" tablet. With a split-screen multi-application display and integrates OE-TSB (technical service bulletin), DTC guidance, repair step-by-step assistance to improve technicians'repair efficiency to a new level. It prioritizes multiple faults, automatically match the circuit diagram of the faults to guide users in troubleshooting, definitely the ideal choice for car workshop owners.

And with the latest technology of AutoVIN/Scan VIN, Autel Ultra Lite diagnostic tool makes it more rapid and accurate to identify your vehicle and get all system scan.

1. Vehicle System and Detected DTC(s)– displays the name of the vehicle system(s) and the detected DTC(s)

2. Technical Service Bulletin– contains DTC-related recalls, TSB, and OEM campaigns.

3. Component Measurement– provides detailed information and instructional guides on using the oscilloscope to test components for faults.

4. Relevant Cases– offers relevant fault-clearing cases for reference.

5. Sput Screen Display–View Multiple Functions AT Once

MaxiCOM Ultra Lit Topology Module Mapping

Single Page Color Coded Module Status Mapping

Autel Ultra Lite automotive scanner can generate a topology map intuitively presenting all module diagnostic results(DTCs status and numbers) in different colors and make you know the communication structure between the modules. This function offers technicians great convenience to locate faults and causes! 
Autel Ultra Lite automotive scan tool with ECU programming or ECU remapping function that allow mechanics and technicians to quickly and efficiently reprogram the ECU to customer or garage specifications, customize car parameters, and replace existing software/firmware in the ECUs to improve the vehicle's overall performance.

【Autel Ultra 2023: Advanced ECU Programming + Coding】


ECU Programming: download the latest version of the software from the online server database through Internet access to update ECUs, and reprograms the newest version into the vehicle's ECU. A series of on-screen operational instructions will display to guide you through the programming procedure. Autel provides its own server for BMW & BENZ software. All other OEM flashing software can be purchased separately and used with the VCI device for programming.

MaxiFlash VCI: The Ultra Lite comes with MaxiFlash VCI, which supports protocols such as CAN-FD, DoIP, D-PDU/J2534/RP1210, making the diagnostic range further expands.

CAN-FD: Transmission speed 14 times faster than CAN. This protocol is available to diagnose post-19 CAN-FD protocol models without adapters (covers post-20 Corvette, Encore, Genesis, GL8, etc.)

DoIP: 100-200 times faster than CAN diagnostics. The protocol applies to post-2018 Volvo, post-2017 Land Rover, and Jaguar, and supports BMW F and G chassis models.

Support D-PDU/J2534/RP1210 Diagnostic Standards: VCI adds support for these protocols, allowing connection to factory diagnostic scanners for diagnostics and ECU programming.

ECU Online Coding: The online coding is supported for Benz, BMW, Audi, Porsche, VW, etc. This feature can be used to write the new code to the ECU after replacement, get the replaced parts known by other ECUs, and customize the setting of vehicles to achieve car personalization, such as controlling auto side mirrors folding, turning on/off auto engine start-stop, customizing the daytime running lights, auto-lock/unlock function, and so on.

ECU Online Programming: For Benz / BMW ONLY

ECU Offline Programming: For Ford, Mazda, Jaguar, Vaxhall, Opel ONLY

ECU Coding + Adaptations: With enhanced ECU coding function, the Ultra lite diagnostic tool allow you to refresh the hidden features, customize the OE settings and enhance the vehicle performance, fuel efficiency, and reduce power loss.

ECU Coding: Benz, BMW, Audi, Porsche, VW, Nissan, Nissan-GTR, Infiniti, Hyundai

Hidden function Renewal: For BMW, VW, Audi, Skoda

Full Bi-directional Control/ Component Test

With the feature of bi-directional control (active test), the scanner Autel Ultra Lite can send commands to the ECUs to activate the a-ctuators to identify the faulty issue by monitoring the operation of actuators.

【Complete 40+ Services Designed for Professional Shops】

Oil Reset Service: reset service mileage and service intervals for the Engine Oil Life system;

TPMS Service: look up the tire sensor IDs from ECU, as well as perform TPMS programming and reset procedures after sensor replacements.

EPB Service: deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and setting brakes after disc or pad replacement, etc.

ABS Service: perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, checking Module information, etc.

SAS Service: perform calibration for the Steering Angle Sensor, and clear fault memory.

DPF Regeneration Service: clear the blockage through the continuous burning of the particulate matter captured in the DPF filter.

BMS Service: perform a reset on the vehicle battery for clearing the fault information and re-match the battery.

How to get More Special Functions for Your Specific Models?

Step1: enter the vehicle selection page and select a test vehicle.

Step2: go to scan and select a system.

Step3: select special functions; you will get various special functions for different systems of different vehicles, such as diesel particulate filter (new) initialization, exhaust throttle adaptive learning position, fuel averaging adaptive initialization, etc.

Note: Different models support different special features, if you are not sure, provide us with the information, and we will help to check.

Active Test Sends Commands and Provides Component Tests

Bidirectional tests can significantly save your diagnostic time for they can test the actuators and accurately pinpoint the vehicle faults, such as turning on/off the fuel, radiator fan, modulating the throttle, operating mirrors, opening/closing windows, cycling the A/C clutch on and off, performing evaporative emissions leak test, etc.

Worldwide and Newer Vehicle Coverage

The MaxiCOM Ultra Lite scanner provides the absolute full range of diagnostics (including read/erase codes, view freeze frame and live data) for any vehicle manufactured in 1996 or later. It doesn’t matter if your garage is geared toward domestic, Asian, and European cars—this diagnostic tool’s got you covered. Supported vehicle more than 80 manufacturers, 140 brands.

Besides, Autel Ultra Lite scanner supplied with MaxiFlash VCI with Enhanced Protocol Compatibility, which supports D-PDU, RP1210, CANFD. J2534 and DoIP protocols.

D-PDU / J2534 / RP1210 Diagnostic Protocols Cover More Vehicle Types

DoIP / CAN FD Protocols for High-Speed CAN Cover New Vehicle Models

More New Added Functions

1. Remote Expert:

2. Expanded Function, Like add on MV108 videoscope, or Autel battery tester BT506

3. WIFI Printing



【Unparalleled Hardware and Dual Wi-Fi】

 
Ultra Lite Specifications

Operating System	Android 7.0
Processor	Samsung Exynos8895V octa-core Processor (2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53)
Memory	4GB RAM & 256GB On-board Memory
Display	12.9 inch TFT-LCD with 2732 x 2048 resolution & capacitive touch screen
Connectivity	WiFix2 (802.11 a/b/g/n/ac 2x2 MIMO) BT v.2.1 + EDR GPS USB 2.0 (Two USB HOST Type A, one USB mini device) HDMI 2.0 SD Card (Support up to 256GB)
Camera	Rear and Front: 16 Megapixel, Autofocus with Flashlight
Sensors	Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/Output	Microphone Dual Speakers 3-Band 3.5 mm stereo/standard headset jack
Power and Battery	18000mAh 3.8 V lithium-polymer battery Charging via 12 V AC/DC power supply with the temperature between 0°C and 45°C
Input Voltage	12V/3A Adapter
Operating Temp.	0 to 50°C (32 to 122°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Dimensions (WxHxD)	366.5 mm (14.43") x 280.9 mm (11.06") x 34 mm (1.34")
Weight	2.18kg (4.81 lb.)
Protocols	DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)

 
Product Comparison Among Msultra, Ultra Lite, MS919 and MS909

Software Comparison


Hardware Comparison


Features Comparison

Package Includes:

1 x MaxiCOM Ultra Lite Main Unit
1 x MaxiFlash VCI
1 x Docking Station
1 x Main Cable V2.0
1 x USB 2.0 Cable V2
1 x AC/DC Adapter(12V)
1 x Auxiliary Power Outlet Adapter
2 x Spare Fuse 6x30mm
1 x Clamp Cable
1 x USB to Enthernet Adapter
1 x Quick Reference Guide
1 x Packing List
1 x Soft Cloth
1 x Carrying Case