New Tech2 Diagnostic Scanner for GM
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2011. If you need to work on new GM vehicles (after 2009), please choose GM MDI (Item number SP163).
Attention: Our software is north american version, we do not have other version software.
Car model supported: GM/SAAB/OPEL/SUZUKI/ISUZU/HOLDEN,
Card version: the card is 32MB Card D, which is showed under the products photoes, you don't need to buy it additionally.
GM (Newly update)
GM-English 32.008 1991-2013
GM-Germany 32.008 1991-2013
OPEL-English V165 1997-2014 (New!!!)
OPEL-Italian 133.001 1997-2012
OPEL-Germany 85.001 1997-2008
OPEL-Spanish 91.001 1997-2009
CAN-BUS (107.021): 2010- (CAN-BUS can work the car models after 2010)
K-line (11.53): 1996-2011 (K-line can support car models from 1996 to 2011)
(When you want SUZUKI software, please notify us you want CAN-BUS or K-line)
HOLDEN-English 145 1999-2012 ( NEW!!! )
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9) Vetronix Tech 2 Specifications
10) Dimensions: 12
11) Microprocessor: 32 bit,16 MHz
12) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13) Communications: Integral RS232 communication port.
14) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
2. The following GM vehicles utilize the CAN interface
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)
Customer Asked Questions:
Q: How to update this GM Tech2? Would we get free updates for a period, if so how long?
A: If the new software comes out, you can send the card back to us, we will put the new software on it and resend it to you. The update is free for all the time. Or you can directly buy another card with the latest software on our website.
Q: Does the kit come with the tis2000 dongle?
A: The tis2000 CD in the package of GM Tech2 does not has dongle. If you want the dongle, you can additionally to buy Item number SO01.
Q: Does this tool can be used to carry out the injector click test and carry out calibration settings for fly by wire sensors?
A: It can carry out the injector click test. For calibration settings for fly by wire sensors, sorry to tell you that we do not test this function.
Q: Will it allow us to program injector grades as well as setting the oil rail pressure sensor setting when replaced.
A: It can program injector grades. This one can set the oil rail pressure sensor. But it cannot set the replaced one.
Q: What year is the car that i can use the TIS2000 CD in the GM package to program?
A: You can use this to program the car before 2007.
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download (199.2 kb)
RS232 cable and user`s manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
TIS 2000 CD