GODIAG V600-BM support Diagnosis,ECU Coding, Programming and Special functions, have same diagnostic functions with ICOM A2, can compatible with Original BMW Software,can work for DOIP K-Line CAN-FD Protocol.
GODIAG V600-BM Diagnostic and Programming Tool for BMW Support DOIP K-Line CAN FD
V600-BM Functions & Features
- Support DOIP K-Line CAN FD
- Support USB WIFI Connection,make communication more easier.
- Support diagnosis, ECU programming, calibration and some special functions
- It features in high-performance CPU, WIFI dual mode (STA/AP), Ethernet communication
- Can work with Original and mainstream BMW diagnostic software, have same diagnostic functions with ICOM A2.
- With the size of about 108 x 52 x 27 mm, the pocket device is more portable
- Cover a wide range of vehicles and support efficient and reliable diagnostic functionsand a variety of special functions.
- Ensure communication security and can encrypt communication data to ensure device and vehicle safety.
- Brand new industrial design, the shell is made of solid and stain-resistant material, it is more suitable for the automobile maintenance environment.
GODIAG V600 stand-out features:
1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT etc, no need to install any driver.)
- Support wired Ethernet connection,can freely switch between 2 modesWAN / LAN.
- Support protocols for BMW diagnosis, including: ISO14230, ISO15765, IFH, DOIP, etc.
- ECU programming and calibration. Fully compatible with official diagnostic software
- Multi-task diagnosis: based on the efficient architecture design of diagnosis service software.
- Can perform vehicle intelligent diagnosis, all-system all-function fast diagnosis; can read & clear fault codes, read data stream, actuation test etc.
- Diagnostic feedback: support one-key upload the device logs. If you encounter exceptional vehicle and abnormal function, you are allowed to report the problem to the manufacturer, then the technicians will track and handle your problem.
- Support WiFi wireless connection, high-speed transmission, long-distance transmission, stable signal and strong anti-interference; WiFi can be set as STA or AP mode at the same time, making users work in comfortable indoor environment.
1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.
2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models
3). Engineer programming & coding software for F series vehicles
4). WINKFP: engineer programming software for E series vehicles.
5). NCS-Expert Tool: engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.
7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicles.
2. Provide a variety of communication modes:
WIFI/BT 802.11 indicator 150Mbps
Suitable power: 7-32 V
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)
4. Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next etc.
5. The Button Function:
F1-Press it for more than 3s to reset factory setting
F2-Press it to restart system
Support OEM professional diagnostic function of all For BMW series:
1 series: 1'_E81/E81/E87/E88,1'_F20/F21
2 series: 2'_F22/F23,2'_F45/F46,2'_F87
3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
4 series: 4'_F32/F33/F36,4'_F82/F83
5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
6 series: 6'_E63/E64,6'_F06/F12/F13
7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
Z series: Z4_E85/E86,Z4_E89
I series: I'_I01/I02
MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60, MINI_F55/F56
V600-BM is Compatible with the Following Diagnostic Software
1.Compatible with ISTA-D, ISTA-P, Tool32, For BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool, and you can directly run them.
2.Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line
BMW ISTA-D Tool32
BMW ISTA-P BMW Coding (not tested yet)
BMW Group ISPI (not tested yet) INPA (not tested yet)
Other versions are being tested, please wait for the update...
LEDs Operating state Non-operating state
DOIP The green light flashes The red light is on The lights don’t work
WIFI/BT The green and blue lights flash alternately The red light is on The lights don’t work
ETH The green light flashes The red light is on The lights don’t work
System The green and blue lights flash alternately The red light is on The lights don’t work
KEYs Function description
F1 Press it for more than 3s to reset factory setting
F2 Press it to restart system
it will sound when V600-BM starts or if there is any abnormal operation.
- Shell The shell is made of Polyamide. Size:108 x 52 x 27 mm
- Power Supply 7-32 V
- Current Consumption About 300 mA when the power is 12V
- CPU 580 MHz MIPS, 32MBFLASH, 128MByte RA,built-in 32G TF card(optional)
- Operating System Linux
- WiFi 150Mbps Wi-Fi 1T1R 802.11bgn
- Interface USB 2.0
- Ethernet 10/100Mbps
- Indicator DoIP indicator
- WIFI/BT indicator
- ETH indicator
- System indicator
- Buzzer Sound Pressure Level: MIN.80 dB
- Temperature Working：-20 ... +55°C, Storage：-20 ... +85°C
- Protection Rating Dust prevention and water resistance conform to IP52
- Conform to Electromagnetic Compatibility Noise emissions：EN 55011,EN 55022
- Anti-interference：EN 61000-6-2, EN 61000-6-4
1pc x GODIAG V600-BM full set
Shipment Option and Delivery Time In OBDiitool.co.uk
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
2. UK, EU Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
- UK Customers Check: Ship from UK
- EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
- Take About 3-7 working days, Free TAX, faster shipping with cheaper price.
- If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
- Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
- We can offer you lifetime customer service and tech support.
- If you have any problems, please provide error image or video to show the problem, and kindly describe it in detail;
- Technician will try their best to help you solve the problem. If there are no solutions, you can return for a refund or get a new one for replacement.
For any question, please contact us at: