Package offer LAUNCH X431 IMMO PLUS With X431 XPROG3 MCU3 Adapter And X431 Smart Key Simulator, support All Keys Lost and ECU TCU Reading, saves you money than buying them alone, We can offer you 5 years warranty, lifetime customer service, and tech support.
LAUNCH X431 IMMO PLUS With X431 XPROG3 MCU3 Adapter And X431 Smart Key Simulator
LAUNCH X431 IMMO PLUS Highlights
- 2 Years Free Update
- 22 Kinds of Languages Support.
- 3-in-1: Immobilizer + ECU Cloning + Diagnostics
- 99% of Vehicle Coverage: No IP limitation and offering FCA SGW vehicle access.
- IMMO Anti-theft Functions: IMMO PLUS LAUNCH scanner can read the immobilizer PIN and backup the key information for later reset/ relearn. Include Read PIN; Key De-lete/ Add/ All Lost; Key Learning; Module Data Wiping; Module Replacement, IMMO ECU Reset, etc.
- Key Programming: Working with X431 PROG3 key programmer, LAUNCH X431 IMMO PLUS serves 99% of coverage and provides Engine/Gearbox ECU Module Cloning & Replacement; Remote Matching; Key Generation; Key Learning; Read/Write Key EEPROM, MCU, Engine, Immobilizer; Backup & Restore Engine ECU Programming Data, etc.
- ECU Module Clone: Cover Engine/Gearbox ECU Clone for 5000+ models. Easily replace the new/used modules without complex & tedious operations.
- ECU Coding: Solving some ECU-related issues and allowing you to personalize your vehicle functions as preference need.
- 39+ Maintenance Functions: IMMO PLUS scanner not only configure comprehensive IMMO functions but also integrates common reset functions for a full range of diagnostics.
- All-system Diagnostics: IMMO PLUS scans all the vehicle control modules and finds out all the DTCs to help you to know what’s wrong with the car.
- Bi-directional Control: An essential feature for quickly locating vehicle problems and saving your time.
- VAG Guided Functions: Offer step-by-step instructions and guide technicians to do fast repairs.
- CAN FD & DOIP: With the assistance of new communication standards, LAUNCH IMMO PLUS auto scanner enables much higher data rates & faster diagnostic speed than ever.
- AutoAuth for FCA SGW: Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later.
Launch X431 X-PROG3 details and functions:
1. Car key slot -Place the car key to perform the key matching function etc.
3. Mercedes-Benz key infrared slot – put the Mercedes-Benz infrared key to perform the key matching function
4. Car key hole – put the key chip to perform matching keys
5. Status indicator–power indicator
6. DIY slot-Connect anti-theft computer pin through cable to read and write data
7. Locker install chip burning socket- FULL EEPROM or MCU data read and write operations
8. DC12V power supply – connect DC12 power supply
9.DB15 – Connect main wiring
This option is designed to help repair shops or technicians
Start instant messaging and remote diagnostics, making repairs faster.
This module allows you to use the currently selected vehicle’s fault information to access its data (including vehicle information, diagnostic record histories) from the cloud server to perform quick testing, eliminate guesswork, and manually step through menu selection.
This feature provides quick access to tested
vehicles and users can choose to view the test report or return to the last operation without starting from scratch
LAUNCH X431 Immobilizer Programmer Simulate Key
Launch X431 smart key simulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the Toyota smart key chip and more key chip types will be supported with subsequent upgrades.
Launch MCU3 Adapter for X431 X-PROG3 GIII for Benz All Keys Lost
Applications and advantages of the new MCU3 adapter
- Adapter board code: 307140131
- ADAS Advanced Driving Assist System
- Audi VW MQB gearbox replacement
- Equipment configuration: non-standard accessories, optional.
- BMW continental msv90 engine ecu replacement and cloning
- Peugeot Key Programming
- Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
- Mercedes Benz w164 2009 Key Programming
- Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
- For BMW E chassis 8hp EGS deleted
- BMW 8hp chassis F and G delete function
- Key programming cas4/cas4+ all keys lost and adding keys
- Programming cas1 cas2 cas3 cas3+ lost keys and add key
- CAS4 immobilizer module replacement
- Replacement of Volkswagen Audi engine and reading data med17 and edc17
- Mercedes Benz med9.7 ecu deleted
- Volkswagen Audi Replacement 4th Generation Instrument Replacement
- Engine replacement for Volkswagen Audi MED17.5.22
- Programming of lost keys and adding key Porsche Cayenne 2011 2017
- Cloning and virginization e39 ac delco
- Power shift cloning and virginization
- Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
- Special features in Chrysler and registration at autoauth FCA sgw
- Special features in GM and Ford
- The mcu3 adapter is not included with the xprog3. Add MCU3 adapter for more functions of X-PROG3 programmer as readings of new ECUs TCM, Mercedes all keys lost etc
- To use this product, customers must have GIII, which is compatible with X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 V, X431 V+, X431 PRO3S+.
When is it can be used?
1. Use the BENCH mode to clone the ECU module, when the 120 ohm resistor is connected as shown in Figure 1, or when the +12V power supply is connected to the IMMO programmer board; the IMMO programmer MCU3 adapter board (with its own power supply) can be used, as shown in Figure 2.
2. With all keys lost for Mercedes-Benz, and the connection for key learning is shown in Figure 3 when operating on the platform.
1 set LAUNCH X431 IMMO PLUS with X431 XPROG3
1 set LAUNCH X431 XPROG3 MCU3 Adapter
1 set LAUNCH X431 Smart Key Simulator
Shipment Option and Delivery Time In OBDiitool.co.uk
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
2. UK, EU Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
- UK Customers Check: Ship from UK
- EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
- Take About 3-7 working days, Free TAX, faster shipping with cheaper price.
- If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
- Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
- We can offer you lifetime customer service and tech support.
- If you have any problems, please provide error image or video to show the problem, and kindly describe it in detail;
- Technician will try their best to help you solve the problem. If there are no solutions, you can return for a refund or get a new one for replacement.
For any question, please contact us at:
OBDiitool.co.uk OBDII tool online supplier
- Whatsapp:+86 18054815707
- Email: Sales@OBDIItool.co.uk
- Skype: Sales@OBDIItool.co.uk
- Hot line: +86 18054815707
- Accepting bulk purchases, We can Offer you wholesale price
- We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.
- Accepting bulk purchases, We can Offer you wholesale price.
- OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.