New Arrival I-2014 Multi-Diag Access J2534 Pass-Thru OBD2 Device
Multi-Di@g Access J2534 Pass-Thru OBD2 Device
Latest version: V2014.01
Support 23 brands updated, 5300 new systems (list of systems updated in Multi-Diag since DVD IV-2013).
Ideal for independent workshops require a diagnostic tool that truly multi-brand delivers in-depth information on a wide range of vehicles.
Support Multi-languages: English, Spanish, German, French, Italian, Portuguese, Bulgarian, Croatian, Czech, Danish, Dutch, Finnish, Hebrew, Hungarian, Polish, Romanian, Russian, Serbian, Slovenian, Swedish, Turkish
Software can be used on XP and WIN7 system.
What should you pay attention to use this software:
1) DISCONNECT the internet when you install and use this software
2) Follow our I-2014V Multi-Diag Access J2534 software installation video install the software step by step
3) Software needs activation before. Please send ID (format is only 31-xxxxxxxxxxx) and your order number to sales@OBDIItool.co.uk, we will send the activation code for free.
4) After finish software installation. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE. Once delete this file. (If your software prompt you out of date when usage, do this step too)
Free download: V2014.01 Multi-Diag Access J2534 Pass-Thru OBD2 Device supported vehicle list
Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe
4.Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Setting up the radio,
Configuration loader CD,
Configuration of the coupler,
Configuration bicycle loading system
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.
V2014.1 Multi Diag Access J2534 System Requirements:
*O.S.: Windows XP; Windows 7 32bit
*CPU: Pentium/Athlon 1.8 GHz or higher
*RAM: 256 MB of system memory
*Hard Drive: 10 GB of available space
*VCI (vehicle communication Interface)
*No Internet, WIFI
*No Antivirus software
Installation multi-diag 1-2014:
1. Before installation to ensure not having connection networks or wifi active
2. Open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
3. Start the installation folder (2) 1-2014
If during your installation software request an unlock key 31-xxxxxxxxxx contact us with the key not give you the activation key valid
Select the language it will continue the installation to completion after the message asking do you restart known not to install the following update etc once the last install
Once the message you want to ask not restart known
4. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE
5. Once delete this file, open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
6. Then install: xs-ime-pt-207p-workshop.exe. You can then restart the pc
Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
Please pay attention Multi-Di@g Access J2534 Pass-Thru OBD2 Device is not good at programming function. And it is not good at Japan cars.
Multi-Diag J2534 Packing List:
VCI (Vehicle Communication Interface)
DB25 to OBD-2 Male cable
OBD2 Male to OBD2 Female cable
Customer Asked Questions
Q: Do i need password when using this product?
A: Yes. When you install the software, it will give you a code. Please send this code to sales@OBDIItool.co.uk
we will send you activation code. Please be sure to set the VCI to A070026.
Q: Is that necessay to use that COM cable?
A: It is not necessay to use that COM cable, you can diectly use usb cable to connect.
Shipment Option and Delivery Time In OBDiitool.co.uk
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
2. UK, Amazon US, Canada, and Australia Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
- Item title marked "Ship from UK"
- Take About 3-7 working days, Free TAX, faster shipping with cheaper price.
- If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
- We have stocked up hot sale items in UK, Amazon US and Australia Warehouse, which is more convenient for you.
- We can offer you lifetime customer service and tech support.
- If you have any problems, please provide error image or video to show the problem, and kindly describe it in detail;
- Technician will try their best to help you solve the problem. If there are no solutions, you can return for a refund or get a new one for replacement.
For any question, please contact us at: