2.THINKCAR pro consists of a diagnostic connector and an mobile APP. The connector is connected to the vehicle diagnostic base and communicate wirelessly with a smartphone or tablet via Bluetooth, enabling the installation of App and diagnostic software in smart terminals for automotive diagnostics.
3.Covered car models: Compatible with all cars after 1996 supporting OBD II protocol.
5.THINKCAR pro's diagnostic capabilities are comparable to professional, expensive integrated diagnostic equipments.
6.It supports full system, basic functions intelligent diagnosis, including reading version information, vehicle information, reading/clearing DTC, reading data stream, maintenance services, vehicle diagnostic reports, etc.
Application scenarios
●During road rescue, or door-to-door service, our portable Thinkcar Pro diagnostic connector is the best choice for service technicians.
●No need for Small repair workshops to buy expensive diagnostic tools, Thinkcar Pro can satisfy the demands on car diagnosis of different vehicles.
●For DIY car owners with maintenance skills, it is very useful to have this full-featured, powerful, yet affordable diagnostic device in their pocket.
Wide vehicle coverage
Covering most models in the U.S., Europe and Asia Pacific regions.
Europe and America
Ford Europe, Mercedes Sprinter, MINI, Seat, Audi, GMSA, Fiat, Opel, GAZ, Peugeot, Volkswagen, Citroen, Skoda, Porsche, Rover, Land Rover, Volvo, VAZ, Renault, Smart, Mercedes-Benz, Jaguar, Dacia, Lancia, BMW, Romeo, Saab, US Ford, Chrysler, GM.
America(USA) :
Chrysler、Ford、GM、GMC、BUICK、Saturn、Pontiac、Chery
Asia Pacific region
Isuzu Thailand, Acura, Daewoo, Jianghuai(GM), SsangYong, Infiniti, Proton, Honda, Mazda, PERODUA, Jiangling Auto, MAHINDRA, Isuzu, Suzuki, BYD, Nissan, Chery, Toyota, Zhongshu, Kia, GreatWall, DAIHATSU, Changan, Geely, Xiamen Jinlong, ZX Auto, Hafei Auto, Xinkai Auto, Gonow, Changhe, Hyundai, Liuzhou Wuling, Subaru, Xiali, AUFord, Mitsubishi, TATA, Zotye, Horton, MARUTI, Lexus.

THINKDIAG MINI Function introduction
Full System Diagnose
With superior all systems diagnostics, this multipurpose obd2 scanner can be used to read all available systems ECU information to facilitate the vehicle diagnosis. The complete systems vary from different cars and they usually include engine, transmission, ABS, SRS, SAS, TPMS, EPB and chassis / body / electrical equipment system etc.

Traditional diagnostics
Supports manual selection of car model software to complete vehicle diagnostics, including reading DTC, clearing DTC, reading data stream, reading version information, etc.
Supports 5 maintenance RESET functions (1 Year free update for special functions):
- SAS service: helps clear the error steering angle sensor reminders and plays an important role in the steering angle sensor calibration.
- Oil Lamp Reset Service: allows you to reset for a new calculation of engine oil life system once the oil is changed.
- IMMO Key Programming: The unique auto key programming and reading pin code function, it is mainly to deactivate the lost vehicle key and program a new replacement key fob.
- Injector Coding: Leaking injectors and some dead injectors can be missed even if an injector is disabled. Other problems with the ignition system and mechanical components also may not show a rpm loss when injector is turned off
- Throttle Adjustment :The throttle body is a tube with a swiveling flat valve (butterfly) used to control the amount of air entering a motor. In an electronically fuel injected car, a throttle position sensor and airflow sensor communicate with the computer, which delivers the appropriate amount of fuel needed to the injectors. It need to re-learn gas sensor position after erasing or repairing
Technical Service Support


OBDII&EOBD full functions
●Real-time data, MIL, IM monitors
●Freeze frame data
●Stored DTCs
●Clear DTCs
●O2 monitoring tests
●Test results for continuously and non-continuously monitored systems
●Pending DTCs
●Request control of on-board-system or component
●Request VIN and other data
●Permanent DTCs
Intelligent diagnostics
Supports automatic VIN reading, automatic identification of vehicle models, and rapid generation of vehicle inspection reports
THINKDIAG MINI Software introduction
ThinkStore
Thinkcar Pro is equipped with a software market in the App and offers more than 98% of the car model software on the market. When using the diagnostic function, the required model software need to be purchased before starting the diagnosis.
When Thinkcar Pro is activated, new users will receive free access to 1 free model software for 1 year.
Model diagnostic software supports online purchases (by credit card or T-code).
Software purchase method:
1. Download "ThinkCar pro" software from Google Mall or Apple App Store to install
2. Insert the connector into the vehicle obd interface
3. Turn on Bluetooth on the phone and connect the connector in the app
4. In the mall, select the software you need, choose to add a shopping cart or buy
5. Choose the payment method. Currently, bank card and Tcde payment methods are supported (Tcade payment is the official payment code of Star Card. You need to go to the official website to purchase. After purchase, you will get a 12-digit number, and then enter it when you pay. Deductible cash)
6. All users can participate in official activities, or earn points through sharing, etc., points can be used to deduct the purchase of diagnostic software, 1 point = 1 USD
Diagnostic report
Thinkcar Pro provides a professional and complete diagnostic report after vehicle diagnostics. The report will be shared with the car owner to clearly understand what is wrong with the vehicle.
Package includes: