ECU Flash Reprogramming DVD for Toyota

Product Description

ECU Flash Reprogramming Precautions

 
It is possible to permanently damage the ecu (ecm/pcm) during the flash reprogramming process.
You must read and understand the following precautionary information before proceeding with reprogramming.
 
You can minimize the risk of damaging an ECU by understanding the following precautions:
 
1. Battery must be fully charged and in good condition. BATTERY VOLTAGE MUST NOT FALL BELOW 11.4 VOLTS OR RISE ABOVE 16.0 VOLTS DURING THE REPROGRAMMING PROCESS.
2. All electrical accessories must be turned off and electrical loads must not be altered significantly during the reprogramming process (i.e. audio system, air conditioning system, interior lighting, daytime running lights, etc)
3. The engine compartment hood must be open and under hood ambient temperatures must not exceed 158ºF
4. Scantool/J2534 interface cables must be in good condition and connections must be electrically sound prior to beginning reprogramming (see TSB SS004-01, "ECU Flash Reprogramming Error Message" for more detail).
5. Do not disconnect the scantool, J2534 interface or PC during the reprogramming process; FAILURE TO FOLLOW THIS INSTRUCTION WILL RESULT IN PERMANENT DAMAGE TO THE ECU.
6. Do not allow the PC running J2534 Calibration Update Wizard software to go into standby or hibernation modes during the reprogramming process; FAILURE TO FOLLOW THIS INSTRUCTION WILL RESULT IN PERMANENT     
    DAMAGE TO THE ECU.
7. Do not cycle the ignition switch off during the reprogramming process except where instructed to do so by the Calibration Update Wizard or scantool software.
8. For ECUs that have more than one CPU to be reprogrammed, you must COMPLETE ALL CPUs before returning the vehicle to service.
9. To ensure stable battery voltage during this process, it is acceptable to connect a battery charger to the vehicle prior to beginning the reprogramming operation. Charger must be set on "low" charge rate and voltage must be maintained within the 11.4 volt to 16.0 volt window for the entire reprogramming process.
10. Set the parking brake for this operation
 
In addition to the above mentioned precautions, it is important to READ THE SPECIFIC TSB ASSOCIATED WITH THE REPROGRAMMING EVENT YOU ARE PERFORMING. Certain vehicles require removal of fuses to prevent accessories from energizing during the reprogramming process. FAILURE TO FOLLOW THE SPECIFIC DIRECTIONS IN THE APPLICABLE TSB FOR VEHICLE YOU ARE REPROGRAMMING CAN RESULT IN PERMANENT DAMAGE TO THE ECU.
 
View Getting-Started
 
 
Language: English
Quantity of CD: 1DVD
Date: 12.2009

• Take About 5-7 working days
• DHL will be the default delivery method
• To help you clearance we will declare a lower price on the invoice to help clearance.
• If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
• For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.

• Take About 7-10 working days,No Tax Problem
• Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
• Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.

• Take About 10-16 working days, Sometimes will be 20 days. 
• Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
• Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail. 
• But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL. 

• UK Customers Check: Ship from UK
• EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
• Take About 3-7 working days, Free TAX, faster shipping with cheaper price. 
• If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
• Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL

• Whatsapp:+86 18054815707
• Email: Sales@OBDIItool.co.uk
• Skype: Sales@OBDIItool.co.uk
• Hot line: +86 18054815707
• Accepting bulk purchases, We can Offer you wholesale price
• We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.

• Accepting bulk purchases, We can Offer you wholesale price.
• OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.