EU/UK Ship 2024 VXDIAG VCX FD for GM Ford Mazda 2 in 1 OBD2 Diagnostic Tool J2534 Passthru Support online Programming Supports CAN FD Protocol

Product Description

VXDIAG VCX CAN FD Diagnostic tool for GM & Ford/Mazda  2 in 1

VCX-FD is a smart vehicle diagnostic interface designed by ALLSCANNER VXDIAG, which represents the diagnostic technology of the next generation. The product uses a newly upgraded dual-core high-speed processor to fully support multi-channel CAN-FD / DOIP and traditional diagnostic protocols, and compatible with more original diagnostic software.
VCX FD also supports local and super remote dual-mode diagnosis to provide users with excellent diagnosis experience.

Supported Software: 
GM GDS2 V2023.10.19 Tech2WIN 16.02.24
Ford IDS V130
MAZDA IDS V131
IDS Patch

Advantages of VCX-FD Hardware:

VCX-FD is Extreme Performance Vehicle Diagnostic Interface

1. Dual -core architecture coordinated work, more communication performance
The 550MHz ARM protocol processor implements CAN-FD and all traditional vehicle BUS protocols.
The 560MHz MIPS network processor realizes the DOIP super diagnostic gateway.
Dual -core processors communicate through the Ethernet, high bandwidth and low latency.
The diagnostic communication speed has been several times more than the previous generation of products.
2. Dual operating system, the software is more stable
The RTOS real -time operating system guarantees the vehicle bus protocol multi -task and the communication.
OpenWRT network operating system flexibly connects a variety of network interfaces and vehicles.
3. Support more comprehensive vehicle BUS protocol
Integrate OBD intelligent protocol multi -router chips, all pins can intelligently switch any protocol.
Support 3-channel CAN-FD multi-channel complication, up to 5M BPS high-speed communication.
Support ISO-13400 standard dual-road DOIP interface Option 1 and Option 2.
4. Flexible and easy -to -use connection method
The host communication interface supports multiple connections such as USB / RJ45 / WLAN, which is flexible and easy to use.
Built -in wireless route mode, diagnostic computers can wirelessly connect devices.
Support the wireless workstation mode, the device can access the wireless LAN, and any computer can connect the device.
Support the vehicle DOIP Ethernet into WLAN to achieve wireless DOIP diagnosis.
5.  Brand New Design
Adopt an integrated design of integrated OBD-II interface, which is convenient to plug and play.
The reinforced Type-C interface can prevent shaking and falling off, and the connection is more reliable.
VCX-FD is More Powerful Vehicle Diagnostic Equipment

1. More comprehensive original vehicle diagnosis
The original diagnostic model brands that VCX-FD are now adapted to have 15 species.
After the hardware update, it fully supports new models and new original diagnostic software based on CAN-FD and DOIP.
Various advanced diagnosis and programming functions have reached the original level, and the speed even exceeds the original equipment.
Support one -click installation, uninstall and upgrade the original factory support driver, easy to use.
2. Upgraded international standard API interface
SAE-J2534-1/2 PASSTHRU V04.04 & V05.00
ISO-22900 D-PDU API for MVCI
RP-1210A/B/C API for VDA
3. Support J2534 Original Online ECU Programming (Needs original online account)
ECU software upgrade and calibration.
ECU replacement and programming.
 

OE-Level All System Diagnostic

By penetrating all available ECUs, including but not limited to PCM, ECM, EPS, PDM, TPM, BCM, ABS, SCCM, etc., VCX FD retrieves information and performs OE-level diagnostics on all available vehicle systems, like read and clear codes, View Data Stream and Freeze Frame and read vehicle information, ECU Replacement. It not only enables you to troubleshoot promptly but also makes you customize the configuration.

 

Bi-directional Control Active Test

The process of sending and retrieving information from a vehicle control module with a device is known as Actuation Test or Bi-Directional Control.

VCX FD is with this capacity. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or re-initialization, thus saving diagnostic time.

J2534 ECU Programming

VCX FD J2534 Pass-Thru ECU Programming Tool can be used with PC to perform ECU programming features. It helps you program blank ECUs, refresh high-end functions, update vehicle ECU software etc., greatly improving the applicability of vehicles.

Work with PC, VCX FD is fully compliant with SAE J2534-1 & J2534-2 standards, supporting major OEM diagnostic tools, it speeds up reprogramming and diagnostics, saving time and boosting efficiency.

We don't provide the original online account for programming.

Advanced ECU Coding / Configuration

VCX FD can perform many advanced features with OEM software, such as refresh hidden functions, disable the annoying functions, enhance vehicle performance, customize OE-settings, reprograms the adaptive data for certain components after repairs or replacements, customized configurations for high-end models and so on to enhance fuel efficiency and ensure safe driving.

We don't provide the original online account for coding.

Complete Services

For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust,battery matching,gear information learning,injector coding, DPF regeneration,headlight matching, gearbox learning, suspension matching ,Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOx reset,start-stop setting, language setting, seat calibration, shielding failure, etc.

How to Set Up & Use VXDIAG VCX-FD?

Let’s start the software installation on WINDOWS system:

1. First download and install software (we don't provide the link)

2. Install the latest VX MANAGER version via www.vxdiag.net

4. Start the VX Manager. Make sure you your computer network is good. Connect your device by USB cable/WiFi to computer and OBD2 Socket to your ECU Bench connector or Your car’s OBD2 Port.

Install Passthru driver. Check your device license.

5. Turn on the car ignition. You can start to diagnose the car.

Installation Tips: Please turn off anti-virus software before install.

VXDIAG VCX FD Parameters:

Hardware Configuration:
 

	Items	Description
	Network processor	32bit 560MHz MIPS 32MB FLASH 128MB DDR
	Protocol processor	32bit 550MHz ARM 1MB FLASH
	Diagnostic interface (vehicle)	SAE-J1962 Standard OBD-II diagnostic interface
	DoIP interface (vehicle)	ISO-13400-4 Option1/2 Ethernet
	Wired interface (PC)	USB TYPE-C
	Network interface (PC)	USB Type-C to RJ-45 Ethernet
	Wireless interface (PC)	Wlan 802.11 B/G/N wireless network
	Button	Fn Reset
	Indicator light	5 LEDs: power, wireless, communication, vehicles and remote
	Powered by	Vehicle power supply: DC 9V-36V (compatible 12V and 24V)
	Power consumption	2W
	Dimension	L x W x H = 140 x 50 x 25 (mm)
	Weight	Equipment weight: 0.3kg Product +toolbox +packaging weight: 0.8kg
	Shell	Reinforced plastic shell
	Operating temperature	-20～+70 °C
	Storage temperature	-40～+85 °C
	Standard certification	EU CE and the US FCC

Support BUS Protocol
 

ISO-15765 CAN / CANFD	VAG TP16 CAN
ISO-13400 DoIP Option1/2	VAG KW81 (SAE J2818)
ISO-9141 K-Line	SAE-J2610 SCI (Chrysler)
ISO-14230 K-Line	SAE-J1567 CCD BUS (Chrysler)
ISO-17987 LIN BUS	SAE-J2740 GM ALDL
SAE-J1850-VPW (GM Class2)	SAE-J2809 HONDA DIAG-H
SAE-J1850-PWM (FORD SCP)	NISSAN DDL UART with CLOCK
ISO-11898-2 DWCAN	BMW DS2
ISO-11898-3 DWFTCAN	FORD UBP
SAE-J2411 SWCAN (GMLAN)	BENZ KWFB
VAG TP20 CAN (SAE-J2819)	BENZ MB-ISO

OBD-II pin BUS Protocol Coverage
 

PIN	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
POWER				GND	GND											BAT
DoIP-1			RX+					ACT			RX-	TX+	TX-
DoIP-2	RX+							ACT	RX-			TX+	TX-
CANFD1						H								L
CANFD2			H								L
CANFD3	H/L	H/L	H/L			H/L	H/L	H/L	H/L	H/L	H/L	H/L	H/L	H/L	H/L
SWCAN	X	X	X			X	X	X	X	X	X	X	X	X	X
PWM		H								L
VPW		X
J1708												H	L
K-LINE	X	X	X			X	X	X	X	X	X	X	X	X	X
UART	X	X	X			X	X	X	X	X	X	X	X	X	X
ADC	X	X	X			X	X	X	X	X	X	X	X	X	X
IO	X	X	X			X	X	X	X	X	X	X	X	X	X

Package List:

1pc x VCX-FD Interface
1pc x Type-C USB Cable
1pc x RJ45 Lan Converter
1pc x Paper Case

• Take About 5-7 working days
• DHL will be the default delivery method
• To help you clearance we will declare a lower price on the invoice to help clearance.
• If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
• For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.

 2)Yanwen Express: 

• Take About 7-10 working days,No Tax Problem
• Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
• Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.

 3)Normal Registered Airmail Post way

• Take About 10-16 working days, Sometimes will be 20 days. 
• Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
• Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail. 
• But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL. 

 2. UK, EU Warehouse Shipping: 

• UK Customers Check: Ship from UK
• EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
• Take About 3-7 working days, Free TAX, faster shipping with cheaper price. 
• If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
• Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL

After-sale service:

• Whatsapp:+86 18054815707
• Email: Sales@OBDIItool.co.uk
• Skype: Sales@OBDIItool.co.uk
• Hot line: +86 18054815707
• Accepting bulk purchases, We can Offer you wholesale price
• We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.

OBDiitool.co.uk OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.