XTOOL has just launched its new model D9 which is a smart automotive diagnostic tool designed for professionals like Automotive Technician, mechanics, diagnostic technicians, used car dealers, and etc. This 9.8” diagnostic tablet features Module Topology, ECU Coding for European vehicles, Full Bi-Directional Controls, 38+ special functions, OE level all systems diagnostics, Premium Hardware, Long battery hours and etc.
XTOOL D9 Automotive Professional Diagnostic Scanner
XTOOL D9 Features
OE-Level Full System Diagnostic:
XTOOL D9 is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.
Smart Auto Vin & Auto Scan + BT Connection + Cable Connection:
XTOOL D9 provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9 to communicate with the vehicle through BT connection, providing you with higher mobility. Use Auto Vin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time.
Commonly-Used 30+ Service Functions:
XTOOL D9 with car service tool is designed for mechanics and workshop, garages. Along with the standard service functions like Oil Reset, EPB, SAS Adjustment, DPF Regeneration, Throttle Relearn and Injector Coding, IMMO, ABS Bleeding, TPMS Reset, BMS Reset, etc. Note: Service functions does not work on all vehicles.
Bi-Directional Control/Active Test + ECU Coding:
XTOOL D9 is a bi-directional scan tool with ECU codding ,allows you to receive information to and from the vehicle’s onboard computer and can send commands to the vehicle ECU to perform active tests without using the vehicle's controls, like A/C Clutch on/off, Fuel Injectors, (Cycling) ABS Pump Motor, window, door, sunroof, etc. That’s helpful for DIY mechanics, speeding up the troubleshooting process when it’s time to make repairs.
Support Newest Doip and with CAN FD Functions:
D9 can work for the Doip protocol and CAN FD. CAN-FD data frame newly adds EDL bit, BRS bit, ESI bit in the control field, and adopts new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)
Excellent Tablet Quality:
10000 mAh 3.7V Battery with 8MP Camera can work with our XV100 Endoscope, 10 inch bigger screen with 2GB RAM + 64GBROM Memory space，with Bluetooth and wifi keep update online.
85+ Brands, 10000+ Cars Coverage & 14 Languages:
XTOOL D9 car diagnostic scanner can work on more than 85+ US domestic, European, and Asian makes and models, more than 10000 cars, the extensive vehicle coverage can provide you with almost every diagnostic option a mechanic could need. With a multilingual menu, you can easily switch between languages, allowing mechanics to avoid language barriers and focus on their vehicle data.
Newest Update of XTOOL D9
2022 Advanced Functions: Support Extension Modules（need to buy additionally）XTOOL D9 is Better on Key programmer or Diagnosis.
1.XV100 Videoscope (mainly apply to check unseen parts of engine, fuel tank, braking system and etc)
2.KC100 (for VW 4th and 5th immo)
3.KS01(for Toyota all key lost programmer )
4.KS02(for Mitsubishi all key lost programmer）
5.EEPROM Adapter(for key programmer or odo)
Optimized High-end Hardware Configurations:
1.The screen size of XTOOL D9 (9.7 inches) based on Andoird 9.0 is larger. One screen can display 15 data stream (Graphic and textual), which is easy to navigate.
2.10000mAh rechargeable battery (up to 20 hours or more of battery life) to avoid frequent charging.
3.2GB+64GB ROM storage to save more vehicle documents and customer data.
4.CPU processor updated been 1.8GHz eight-core to perform diagnostics quickly and efficiently.
XTOOL D9 Functions
ECU Coding & Online Coding
Perform Programmable Module Installation function for Ford, Lincoln and Mazda, to:
- Copy the codes from old module to the new one when you have swapped the ECU/Module from a doner car.
- Perform Programmable Module Installation(PMI) to reprograms the adaptive data for certain components after repairs or replacements
Online ECU Coding/ECU Replacement for specific VW, Audi, Skoda & Guided Functions for V.A.G. vehicles.
When an ECU/module is damaged, you have to replace it with a new one. After replacing the ECU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car may not start or some parts cannot work normally. And with Guided Functions, you can perform many complicated special functions with the on-screen step-by-step instructions.
- Online Account Login
- Guided Functions
- Flash Hidden Functions
- Online Calibration
- Component Matching
- Programmable Module Installation
- ECU Software Update
OE Level All Systems Diagnostics & Full Bi-Directional Controls
As a professional automotive diagnostic computer, XTOOL D9 is capable of performing OE level diagnostics on 10,000 vehicles globally to read & clear codes, reset monitors, turn off warning lights, view live data & graphing, export data as CSV, retrieve freeze frame, perform active tests, Resets, Relearns, Matchings, Adaptations, Initializations and etc
- Work on American, European, Asian, Australian vehicle makes and models;
- Work on Sedans, Light Duty Trucks, SUVs, mini vans, hybrid vehicles;
- Access and scan all available car modules for OE level diagnostics(adapters may apply);
- Display module status with Topology Mapping to provide insights into the interconnections between modules and fault locations;
- Read and clear generic codes, manufacturer-specific codes, pending codes, stored codes, and intermittent codes;
- Turn Off Warning Lights: Turn off Check Engine Warning Light(MIL), ABS Warning Light, Airbag Warning Light, TPMS light and etc;
- View live data stream and graph up to 8 sensors;
- Export Live Data as CSV file for future comparison;
- Perform various vehicle-specific active tests/bi-directional controls;
- Perform advanced features like resets, relearns, adaptations, matchings, initializations and etc
NOTE: To check misfire counters, monitor readiness status, o2 sensor status, please go to Diagnosis- OBDII- On_Board Monitor Tests/I/M Readiness Status/O2 Monitor Test.
42+ Maintenance Services
XTOOL D9 has included 42+ Maintenance Services that any repair shop would ever need for daily auto maintenance service jobs including:
- HV Battery: Check HV battery pack voltages.
- EGR Relearn: Relearn the EGR system after replacement.
- A/C Relearn: Relearn the A/C system after replacement.
- VGT Relearn: Relearn the VGT Turbo after replacement.
- Oil Reset: Perform reset for a new countdown of engine oil life system once changed the oil.
- EPB Reset: Reset brake pads to maintain the electronic braking system safely and effectively.
- SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.
- ABS Bleed: Bleed the air out of the ABS system for firm brake pedals.
Oil Reset, EPB, SAS, BMS, DPF/GPF, Throttle, TPMS Reset, Gearbox Match, Suspension Calibration, ABS Bleed, Injector Coding, Key Programming, Airbag Reset, Headlight(AFS), Gear Learning, Power Balance, Seat Configurations, Electronic Pump Activation, A/F Reset, Start/Stop Reset, Language Change, ECU Configurations, Tire Upgrade, Transport Mode, ODO Read, Reset Control Unit, Rain/Light Sensor, A/C Relearn, HV Battery, Cylinder, VGT Relearn, VIN Writing, NOx Reset, FRM Reset, EGR Relearn, AdBlue Reset, ADAS Calibrations(needing calibration frames), SRS, Speed Limit and etc.
Advanced Special Functions, including:
Crankshaft Relearn, Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, SWS Calibration, Yaw Rate Sensor Calibration, ABS Initialization, Transmission Oil Counter Reset, Trans Adaptive Values Reset, Injector Quantity Adjustment, Brake Pedal Sensor Calibration, Pilot Quantity Learning, VIN Relearn, Radio Setup, HVAC Calibration, Engine Test On/Off(for Hyundai) and etc. NOTE: Special functions do NOT work on all vehicles. Come with VIN # to check compatibility prior to purchase.
NOTE: If you did not see 42+ special functions, you are still using older version App. Please go to Setting-App-Click the right corner to update the App to the latest.
Extensive Vehicle Coverage - 10000+ Cars Supported:
Aisa: Compatible with (JAPAN) Acura, Daihatsu, Honda, Infiniti, Isuzu, Jpisuzu, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Scion, Subaru, Subaru, Suzuki, Tlisuzu, (KOREA) Daewoo, Hyundai, KIA, Samsung, Ssangyong; (CHINA) Baic, Beijing, Changan, Changan-Ford, Changcheng, Changhe, Chsuzuki, DF Peugeot, DF Honda, DF Nissan, DF XK, Flyer,BYD, Fukang, Futian,Foton, Geely, Gonow, GZ Honda, Hafei, Haoqing, HC BMW, Hmada, Huachen, Isuzu, JMC, Jacty, Jianghuai, Jiao, Jinlong, Joylong, Lifan, Liuwel-TY, Luxgen, NJ Fiat, Qirul-TY,chery, Qoros, Saicmg, Spark-TY, Trumpchi GAC, Weili, Xiaokang Dongfeng, Xili,Faw Tianjin, Xinkai, YQ Mazda, Zhongshun, Zhongtai, Zotye, Zhongxing (MALAYSIA) Perodua, Proton, (IRAN)MVM
Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR
USA: Compatible with Gm, USAFord, Chrysler, Willy; Australi
a: Compatible with Austford, Holden; Brazil: Compatible with BXFiat, BXGM
Shipment Option and Delivery Time In OBDiitool.co.uk
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
3)Normal Registered Airmail Post way
- Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
2. UK, EU Warehouse Shipping:
- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
- UK Customers Check: Ship from UK
- EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
- Take About 3-7 working days, Free TAX, faster shipping with cheaper price.
- If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
- Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
- We can offer you lifetime customer service and tech support.
- If you have any problems, please provide error image or video to show the problem, and kindly describe it in detail;
- Technician will try their best to help you solve the problem. If there are no solutions, you can return for a refund or get a new one for replacement.
For any question, please contact us at:
OBDiitool.co.uk OBDII tool online supplier
- Whatsapp:+86 18054815707
- Email: Sales@OBDIItool.co.uk
- Skype: Sales@OBDIItool.co.uk
- Hot line: +86 18054815707
- Accepting bulk purchases, We can Offer you wholesale price
- We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.
- Accepting bulk purchases, We can Offer you wholesale price.
- OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.