1pc x VW Passat MMC instrument interface board
6pc x MQB/MMC Copper pillar package (Single head six angle stud M3*14+6mm)
1pcs x PCF Key Adapters
Confirmed! Mini ACDP can program new key to VW MQB when all keys lost, no need soldering!
MQB module 6 with PCF- key adapter
In order to observe the operation visually, here use desktop platform to demonstrate MQB key matching.
Enter Mini ACDP APP
Select “VW”-> “MQB PLATFORM INSTRUMENT”-> “INSTRUMENT with NEC35xx (Continental/VDO)”-> “IMMO”-> “Auto Mode”
Connect the ACDP host with vehicle OBD port and turn on the switch
Put the smart key close to the steering column emergency start coil
Check the vehicle info read out
When reading EE and IMMO data, the meter black screen is a normal phenomenon
After reading the data, the meter will automatically light up and return to normal
Save EEPROM data
Save IMMO data
Check the IMMO info
Plug the working key into the PCF-KEY adapter according to the prompt
Note: The key must be a smart key! Keys generated with the original key cannot be replaced anti-theft lock online!
Read the working key successfully
Follow the prompt to put a blank key into the PCF-KEY adapter instead of the working key
Generate key success
Pay attention to the prompt about learning the new key
Put the working key close to the steering column emergency starting coil, ready to learn the key
Select the number of keys to learn (incl. the number of the original car key)
Put the blank key instead of the working key to learn
Keys learning success!