A:Hi, Yes. this is in stock in the EU. We will ship out from us, 3-5 working days for the delivery. no tax.

A:Hi, this is in stock in the EU. We will ship out from us, 3-5 working days for the delivery. no tax.

A:
No difference on the im608 tablet. It's just down to the XP400 and the XP400-Pro that come with them that allows for the extra functionality.

A:Yes, it can.

A:Yes, IM608 PRO can support.

A:Yes, The MV105 and MV108. On the main screen slide towards the left and you will see "Digital Inspection"

A:YES, support:)

A:it does the ecu coding, not much ECU programming, only few SCN and BMW module programming.

A:Yes, with the IMKPA kit.

A:
IM608/IM608 Pro can do immo related system scn coding.
IM608 Pro can do immo related system programming.

A:
yes, with the xp400pro.

A:yes it can.

A:
No. There is no way to get the APK file, and running a Emulator is sketchy at best.
The XP400/Pro does have EEPROM software than can be download onto PC though.

A:Only coding.

A:
If Car doesn’t have FEM or is damaged :
1) Prepare Used FEM ( FEM/BDC Test Platform needed )
– Do a FEM Backup CODING (if necessary)
– Dump EEPROM (FEM 95128, BDC 95256)
– Modify EEPROM
– Write MODIFIED EEPROM
– Program FEM ( ECU processing )
– Restore Original EEPROM
2) Read ISN from DME (BENCH mode) G-BOX2 needed
3) Go to FEM/BDC Renew Calculate Data Update (Used Module)
– Write VIN, FREQUENCY, ISN to the used FEM module
– Repair CODING
– Key Learning ( add new key )
– Reset Starter Lock
4) install FEM to the Vehicle and do the 10 second Learning Start/Stop button to complete the add key procedure.
5) Start the engine (delete DTC’s)
PS : if your car has ELV, modify ELV EEPROM (Virginize it with hex editor)

A:Yes, it will.

A:Yes, it supports.

A:
Hi, I inquire with the engineer, here is the answer:
1. Yes, IM608 pro supports for the function you need.
2. It can be done under the programmer menu
Thanks for your inquiry.