V2024.06 GODIAG V600-BM BMW Diagnostic Tool With BMW ICOM Software 1TB SSD Can Replace BMW ICOM, ICOM A2 / A3 / Next

Product Description

V2023.03 GODIAG V600-BM BMW Diagnostic Tool With BMW ICOM Software

• Come with V2023.03 BMW ICOM SSD, ISTA-D 4.41.30, ISTA-P 70.0.200
• And obdiitool.co.uk will provide lifetime customer service and tech support. 
• Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next etc. Can be used together with Original BMW Software.

V600-BM Functions & Features

• Replace BMW ICOM Next
• Support WiFi wireless connection
• With the size of about 108 x 52 x 27 mm, the pocket device is more portable
• It features in high-performance CPU, WIFI dual mode (STA/AP), Ethernet communication
• Cover a wide range of vehicles and support efficient and reliable diagnostic functionsand a variety of special functions.
• Ensure communication security and can encrypt communication data to ensure device and vehicle safety.
• Brand new industrial design, the shell is made of solid and stain-resistant material, it is more suitable for the automobile maintenance environment.
• Support WiFi wireless connection, high-speed transmission, long-distance transmission, stable signal and strong anti-interference; WiFi can be set as STA or AP mode at the same time, making users work in comfortable indoor environment.

Functions

• Supports all mainstream BMW diagnostic software 
• Support diagnosis, ECU programming, calibration and some special functions
• Support wired Ethernet connection,can freely switch between 2 modesWAN / LAN.
• ECU programming and calibration. Fully compatible with official diagnostic software
• Multi-task diagnosis: based on the efficient architecture design of diagnosis service software. 
• Can perform vehicle intelligent diagnosis, all-system all-function fast diagnosis; can read & clear fault codes, read data stream, actuation test etc.
• Diagnostic feedback: support one-key upload the device logs. If you encounter exceptional vehicle and abnormal function, you are allowed to report the problem to the manufacturer, then the technicians will track and handle your problem.
• V600-BM CAN-FD J2534 can access to all systems of newest For BMW car models to quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming , retrofitting and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features etc

V2023.06 BMW Software Version:

1. Software Version: V2023.06 
2. Support System: Win10 64bit
3. Software Type: SSD
4. Support Language: ISTA/D(Wiring diagram) Languages: English(Default), French, Spanish, Portuguese, Dutch, German, Thai, Italian, Russian, Korean, Japanese, Chinese, Swedish, Greek.  ( Only 1TB HDD/SSD has)
5. Support Vehicle List: for Mini, for Motorcycles, for Rolls Royce, for BMW i Series.
6. System Requirements: At least I5 Generation 2 with 4G Memory. (4G RAM should be full 4G)
7. Support Model: Suggest to use Lenovo ThinkPad T420 and T430, X61, X200, X201, X220, X230. Other models (Intel chipset can compatible, almost all the laptop as I5 / I7 series)
8. Compatible Device: ICOM NEXT A, ICOM A2+B+C

V2023.06  Ista D/P ICOM Diagnostic Software Contains:
BMW software upgrade 2023. 06(win10 X64) requires a 1TB hard drive
Diagnostic programming system: ISTA 4.41.30, SDP programming database 4.41.30, multilingual, VIN data date 2023.05.10
Programming system ISTA-P 70.0.200, supports programming of BMW motorcycles and electric vehicles
Accessories Inquiry ETK 2019.11
INPA 5.06, winkfp 5.3.1, NCS 4.0.1
BMWAi Hidden Functions Activation  4.6
E-SYS pro version 3.35.3, database V71.0,
E-sys PLUS 3.81,
DR.GINI B022

The latest FSC navigation code calculation software and IBAC code calculat

GODIAG V600-BM Supported Software:

• Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line
• Compatible with ISTA-D, ISTA-P, Tool32,  For BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool

Godiag V600-BM first time setup guide:

• 1. Locate the registration slip included in the packaging
•  - Open carefully to reveal the device serial number and product key
•  - These are required for first time setup your new V600-BM inteface 
• 2. Download Godiag V600-BM firmware updater (add download link here)
• 3. Extract the contents of the zip file to a folder
• 3. Run the Godiag firmware updater by double clicking the file "STTech.AnyVCI.Updater.exe"
• 4. For first time users, register the device by entering your email, password of your choice, product serial number and product key in the required fields
•   - If you have already registered, you can login with your email and password
• 5. On the main page you can select various options such as firmware update, license update and advanced settings
• 6. Please follow our Godiag V600-BM online guides to update device firmware or update license
• 7. The Godiag V600-BM is now ready to use and fully compatible with BMW standard tools 
• 8. We can also provide the latest BMW diagnostic software (ISTA+ & ISTA-P) on HDD or SSD contact us here Sales@obd2eshop.com

Support OEM professional diagnostic function of all For BMW series:

• 1 series: 1'_E81/E81/E87/E88,1'_F20/F21
• 2 series: 2'_F22/F23,2'_F45/F46,2'_F87
• 3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
• 4 series: 4'_F32/F33/F36,4'_F82/F83
• 5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
• 6 series: 6'_E63/E64,6'_F06/F12/F13
• 7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
• X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
• X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26
• Z series: Z4_E85/E86,Z4_E89
• I series: I'_I01/I02
• MINI:  MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60,  MINI_F55/F56

GODIAG V600 stand-out Hightlight:

1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT etc, no need to install any driver.)
1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.
2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models
3). Engineer programming & coding software for F series vehicles
4). WINKFP: engineer programming software for E series vehicles.
5). NCS-Expert Tool: engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.
7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicle

2. Provide a variety of communication modes:
USB 2.0 
DoIP indicator
Ethernet 10/100Mbps
WIFI/BT 802.11 indicator  150Mbps
ETH indicator
System Indicator

3. Specifications
Suitable power: 7-32 V  
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)

4. The Button Function:
F1-Press it for more than 3s to reset factory setting
F2-Press it to restart system

V600-BM Parameters

Shell	The shell is made of Polyamide.  Size:108 x 52 x 27 mm
Power Supply	7-32 V
Current Consumption	About 300 mA when the power is 12V
CPU	580 MHz MIPS, 32MBFLASH, 128MByte RA, built-in 32G TF card(optional)
Operating System	Linux
WiFi	150Mbps Wi-Fi 1T1R 802.11bgn
Interface	USB 2.0 Ethernet 10/100Mbps
Indicator	DoIP indicator WIFI/BT indicator ETH indicator System indicator
Buzzer	Sound Pressure Level:  MIN.80 dB
Temperature	Working：-20 ... +55°C, Storage：-20 ... +85°C
Protection Rating	Dust prevention and water resistance conform to IP52
Conform to Electromagnetic Compatibility	Noise emissions：EN 55011,EN 55022 Anti-interference：EN 61000-6-2, EN 61000-6-4

V600-BM is Compatible with the Following Diagnostic Software

BMW ISTA-D                                                       Tool32
BMW ISTA-P                                                       BMW Coding (not tested yet)
BMW Group ISPI (not tested yet)                        INPA (not tested yet)
E-SYS
Other versions are being tested, please wait for the update...

Status LEDs

LEDs	Operating state		Non-operating state
	Normal	Abnormal
DoIP	The green light flashes	The red light is on	The lights don’t work
WIFI/BT	The green and blue lights flash alternately	The red light is on	The lights don’t work
ETH	The green light flashes	The red light is on	The lights don’t work
System	The green and blue lights flash alternately	The red light is on	The lights don’t work

Function KEYs

KEYs	Function description
F1	Press it for more than 3s to reset factory setting
F2	Press it to restart system

Buzzer
Note: it will sound when V600-BM starts or if there is any abnormal operation.
 
Package includes:
1pc x GODIAG V600-BM Interface
1pc x  V2023.06 1TB BMW ICOM SSD

• Take About 5-7 working days
• DHL will be the default delivery method
• To help you clearance we will declare a lower price on the invoice to help clearance.
• If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
• For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.

 2)Yanwen Express: 

• Take About 7-10 working days,No Tax Problem
• Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
• Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.

 3)Normal Registered Airmail Post way

• Take About 10-16 working days, Sometimes will be 20 days. 
• Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
• Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail. 
• But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL. 

 2. UK, EU Warehouse Shipping: 

• UK Customers Check: Ship from UK
• EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
• Take About 3-7 working days, Free TAX, faster shipping with cheaper price. 
• If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
• Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL

After-sale service:

• Whatsapp:+86 18054815707
• Email: Sales@OBDIItool.co.uk
• Skype: Sales@OBDIItool.co.uk
• Hot line: +86 18054815707
• Accepting bulk purchases, We can Offer you wholesale price
• We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.

OBDiitool.co.uk OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.