Godiag GT100 ECU Connector Features
Safety precaution: To avoid personal injury, vehicle / equipment damage, please read this manual first. There are some safety precautions should be followed when working on the vehicle:
1) Always work in a safe environment
2) Wear the goggles that comply with ANSI standards.
3) Ensure that clothes, hairs, hands, tools and equipment are kept away from the running engine parts or the hot engine parts.
4) Ensure that the working area is well-ventilated because the vehicle exhaust is toxic.
5) Place bricks in front of all wheels to prevent accidental movement of the vehicle.
6) During testing and working, someone must supervise the vehicle.
7). Be extremely careful when working near the ignition coil, distributor cap, ignition wire, spark plug, these components will generate dangerous voltage.
8) Shift to P gear (for an automatic transmission car) or N gear (for a manual transmission car), and ensure that the parking brake is in the active state (pull up the handbrake).
9) Make sure there is a fire extinguisher suitable for gasoline/chemical/electrical nearby.
10) Do not plug or unplug the device when the ignition is turned on or the engine is working.
11) Keep the equipment dry and clean, and avoid contact with oil, water or grease. Please clean the equipment with a clean cloth and gentle detergent.
Functions of GODIAG Programming Test Platform
Godiag CAS4 / CAS4+ test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 CAS4+ programming engineers.
1. By working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Lonsdor k518 / Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access.)
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key.
When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.
GODIAG GT100 Parameter
Content | Specification |
Diagnostic port | OBDII |
Working voltage | DC 9V-24V |
Work and power | 0.5-0.6W |
Adapter power | Input AC100v-240v, Output DC12V 1A |
Operating temperature range | -20 to 70 °C ( -4 to 158 °F ) |
Storage temperature range | -40 to 85 °C ( -40 to 185 °F ) |
Dimension | L: 23cm, W:18cm, H:7cm |
1. Manufacturer custom 2. SJE1850 wire 3. Manufacturer custom 4. Power grounding 5. Signal grounding 6. SAEJ2284《CAN》high 7. ISO9141-2&iso, DIS4230-4K wire 8. Manufacturer custom |
9. Manufacturer custom 10. SJE1850 wire《bus-> 11. Manufacturer custom 12. Manufacturer custom 13. Manufacturer custom 14. SAEJ2284《CAN》low 15. ISO9141-2 & ISO/DIS 4230-4L wire 16. Car battery positive |