EU/UK Ship Launch X431 V 8inch Tablet Full System Diagnostic Tool With Launch X431 GIII X-PROG 3 All-in-One Key Programmer

Product Description

• Our Dealer Code: 755D
• Ship from UK Warehouse! Fast Delivery with Tax Free!
• LAUNCH Official authorized dealer, 100% original 
• Free Update 1 years, after 1 years it costs 599 USD/2 Years.
• Support 24 languages: English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish, Persian, Romanian, Serbian, Swedish, Chinese Traditional.

Top 5 Reasons to buy X431 V 8":

1. Support communicate with the vehicle via Wifi and Bluetooth, Bluetooth distance:10M(Without Obstacle).
2. Full system diagnosis and fast running speed, Reasonable PDA design, easy to carry
3. Support 30+ special functions: Oil Reset, EPB Reset, BMS Reset, DPF Reset, SAS Reset, TPMS Reset, IMMO reset, ABS Bleeding, Throttle Reset, Gear Learning and Injector Coding.
4. Note: These special functions NOT for all car models, if you are confused, please send your car brand, model and release year to us to check it for you.
5. Wide-vehicles support: vehicles support 113 car brands from European, USA, Asian, AU, India, Brazil and Malaysia vehicles

X-431 V can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China.
Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include ABS system, Engine system, SAS system, TPMS system, IMMO system, Battery system, Oil service system, SRS system, etc.
1. European
For ABARTH, For ROMEO, For AUDI, For BMW, For CITROEN, For DACIA, For FERRARI, For FIAT,For FORD(EUR),For GAZ, For JAGUAR,For LANCIA, For
LANDROVER, For MASERATI, For MAYBACH, For MERCEDES, For OPEL, For OPEL(SA), For PEUGEOT, For PORSCHE, For RENAULT, For ROLLS-ROYCE, For ROVER, For SAAB, For SEAT, For SKODA, For SMART, For SPRINTER, For VAZ, For VOLVO, For VW

2. America
For CHRYSLER, For FIAT(BRA), For FORD, For FORD(AUS), For GM, For GM(BRA), For HOLDEN

3. Asian
For ACURA, For DAEWOO , For DAIHATSU, For HM, For HONDA, For HYUNDAI, For INFINITI, For ISUZU, For ISUZU(THAILAND), For KIA, For LEXUS, For LUXGEN, For MAHINRA, For MARUTI, For MAZDA, For MITSUBISHI,For NISSAN, For PERODUA, For PROTON,For SSANGYONG, For SUBARU, For SUZUKI, For
TATA, For TOYOTA

4. Chinese
For BYD, For CHANGAN, For CHANGHE, For JIAO, For GREAT, For WALL, For HAFEI,For JAC, For JINLONG, For ISUZU, For LIUWEI_TY, For QIRUI_TY, For TIANJIN, For FAW, For XINKAI, For ZHONGSHUN, For ZHONGTAI , For ZHONGXING

5. Other Vehicle Models:
Russia car models: GAZ, VAZ
Brazil car models: FIAT, GM
Malaysia car models: PERODUA(PERODUA), PROTON
IRAN car models: IKCO, MVM
India car models: TATA, MARUTI, MAHINDRA
Note: Software with the red font is required to be purchased separately.

X431 V Functions 

1. All System Diagnostic Tool-Launch x431 V

1) Full Diagnose Function: X431 V can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American. Full range car models and Full car systome diagnose make it a professional automotive diagnostic tool
2) Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special Funtion etc.
3)  Bidirectional control:Bi-Directional Control which is used to request information or command a module to perform specific tests and functions
4) Actuation Test: it can send information to and receive information from a vehicles control module.
5) ECU Coding: after replace a new ecu for car, x431 v can help you code it. It is very useful for mechanic.
6) Remote Assistance: launch x431 v support remote diagnosis, if you need help from other mechanic, open the remote control function.
7) Diagnostic Report Print: x431 v can automatically generate a diagnostic report when diagnostic work is successfully finished.Generated diagnostic report will be saved and sent to the email box then print the report on PC.

15 Kinds of Special Reset Service Functions:
1) Oil Reset Service: reset service mileage and service interval
This function can be performed in the following cases:
* If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
* After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

2) Steering Angle Calibration: perform calibration for the Steering Angle Sensor
* To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
* After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.

3) Electronic Parking Brake Reset: When the brake pad is used to a certain thickness, it will be ground to the brake pad sensing line. At this time, the brake pad sensing wire will send a signal to the onboard computer, prompting to replace the brake pad. After replacing the brake pads, you need to reset the brake pads, otherwise the car will continue to alarm.
* If the brake pad wears the brake pad sense line, the brake pad sense linesends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
* Reset must be performed in the following cases:
The brake pad and brake pad wear sensor are replaced.
The brake pad indicator lamp is on.
The brake pad sensor circuit is short, which is recovered.
The servo motor is replaced.

4 ) Battery Register / Battery Maintenance: reset battery management system
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
* Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function,power window without automatic function.
* Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument panel

5) ABS Bleeding:When the ABS system contains air, it is necessary to exhaust the brake system through the ABS exhaust function, thereby restoring the sensitivity of the ABS system brake.
This function allows you to perform various bi-directional tests to check the operating conditions of Anti- lock Braking System (ABS).
* When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
* If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line , or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

6) Electronic Throttle Position Reset / Learn: ensure communication with ECU after replacement
This function enables you to initialize the throttle actuators so that the "learned" values ​​stored on ECU are returned to the default state.
Doing so can accurately regulate throttle (or idle engine) operations to control the amount of air intake. Throttle matching must be performed in the following cases:
A) The ECU is replaced and the ECU does not yet store throttle working features.
B) The ECU is disconnected from power and the ECU memory is lost.
C) The throttle assembly is replaced.
D) The intake pipe is replaced or removed, which affects idle speed control by ECU and throttle body.
E) The throttle is cleaned. Although the idle throttle potentiometer features remain unchanged, with the same throttle opening, the air inflow has changed and idle speed control features have changed.

7) Diesel Particulate Filter (DPF) Regeneration: supports forced DPF regeneration and adjusting injectors
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
A) The exhaust back pressure sensor is replaced.
B) The PM trap is removed or replaced.
C) The fuel additive nozzle is removed or replaced.
D) The catalytic oxidizer is removed or replaced.
E) The DPF regeneration MIL is on and maintenance is performed.
F) The DPF regeneration control module is rep
G) Tire Pressure Monitor System Reset

8) Tire Pressure Monitor System Reset: This function is used to reset the tire pressure sensor. When the car tire air pressure fault indicator is on, after the repair, the tire pressure system needs to be reset by the tire pressure reset function, and the tire pressure fault indicator is extinguished.

9) Gear Learning:The crankshaft position sensor adaptive learning, the crankshaft position sensor learns the machining error of the crankshaft teeth, and stores it in the computer to more accurately diagnose the engine misfire.

10) Fuel Injector Coding: This function can write the actual code of the injector or rewrite the code stored in the ECU into the code corresponding to each cylinder nozzle, so as to more accurately control or correct the fuel injection amount of each cylinder.
 
Additional 5 More Reset Functions:
Air Suspension Reset
Gearbox Reset
Sunroof RESET
AFS Reset
EGR Reset
 
Note : These special function NOT for all car models, if you are confused, Please send your car brand, model and release year to seller to check it for you .

X431 V  Connecting by Bluetooth
X431 V communicates via Bluetooth, it is very easy to use.  X431 V Pad computer is specially designed for Android platform with clear and user-friendly interface. X431 V Pad computer is equipped with an exclusive X-431 V protection sleeve to prevent it from being damaged;

The owner can use golo connector to connect to his smart phone, then he can do a all system fault diagnosis of vehicle at any time, then form a diagnosis report, and transfer the report to maintenance technicians and related personnel through the account management interface, then he get the remote consultation and repair advice.

• 100% Original Launch Device.
• All-in-One Key Programmer. Integrates Multiple Function Models
• Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
• Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, etc
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.

Note: It is strongly recommended to connect the diagnostic tool with the VCI connector using a USB cable for effective data transmission.

Launch X431 GIII X-PROG 3 Features
Supported Brands
VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates to be continue)

Supported Systems
Engine system, automatic transmission, instrument system, CAS, body system, lock system…

Compatible With 
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, no need to bind, flexible to use, and a wide range of adaptations.

Launch X431 GIII X-PROG 3 Functions
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning te ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearboxh ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).

Supported ECU MCU List:
Support more than 1000 models, keep updating

Atmel	NSC
Fujitsu	Philips
Infineon	Renesas M16
MC68HC05	Renesas M32
MC68HC08	Renesas M32R
MC68HC11	Renesas R32C
MC68HC12	Renesas R8C
MediaTek	Renesas V850 SPI
MicroChip	Renesas V850 UART
Nordic	Samsung
ST	SiLabs

Support EEPROM List:
Support more than 1000 models, keep updating
 

4Wire	GI	Numonyx	SST
Adesto	GigaDevice	OKI	ST
AKM	Grundig		ON Semi	Toshiba
Altera	HOLTEK	Other	Winbond
Amic	Hynix	PCT	Xicor
Atmel	I2C	Philips	xUSSR
BOSCH	ITT	Pioneer	YMC
Catalyst	KHIC	PMC	Spansion
Chingis	Macronix	Ramtron	SPI
Dallas/Maxim	MicroChip	Rohm	NEC
EON	Micron	Samsung	NSC
ESMT	MicroWire	Seiko	Ford
EXEL	Mitsubishi	Siemens	Fujitsu
Fairchild	Motorola	Sony

 

• Take About 5-7 working days
• DHL will be the default delivery method
• To help you clearance we will declare a lower price on the invoice to help clearance.
• If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
• For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.

 2)Yanwen Express: 

• Take About 7-10 working days,No Tax Problem
• Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
• Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.

 3)Normal Registered Airmail Post way

• Take About 10-16 working days, Sometimes will be 20 days. 
• Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
• Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail. 
• But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL. 

 2. UK, EU Warehouse Shipping: 

• UK Customers Check: Ship from UK
• EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
• Take About 3-7 working days, Free TAX, faster shipping with cheaper price. 
• If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
• Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL

After-sale service:

• Whatsapp:+86 18054815707
• Email: Sales@OBDIItool.co.uk
• Skype: Sales@OBDIItool.co.uk
• Hot line: +86 18054815707
• Accepting bulk purchases, We can Offer you wholesale price
• We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.

OBDiitool.co.uk OBDII tool online supplier

• Accepting bulk purchases, We can Offer you wholesale price.
• OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc. 
• Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.