Product Description
- Launch GIII Compatible with X-431 series diagnostic scanners, Supports MQB
- It is A powerful chip reading device for reading/writing keys to the vehicles.
- Enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading, and anti-theft component replacement.
- Launch X-prog3 compatible keys: 1. Original Keys (OEM keys) 2. Launch dedicated universal remote keys 3. Xhorse Autel Keydiy universal keys (generated by corresponding remote makers.)
Launch X431 G3 X-PROG 3 Immobilizer & Key Programmer Supports MQB
X-431 GIII X-PROG 3 Highlight
- Ship From EU/UK, fast delivery, Free tax !
- LAUNCH Official authorized dealer, 100% original
- Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
- X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
- Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
- Compatible with Multiple X-431 Series Diagnostic Tablet (PRO Elite, X-431 V, X-431 V+, X431 Pro5, X431 ProS, X431 Pro3s+, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc)
Launch X-PROG 3 Main Functions:
- All-in-One Key Programmer. Integrates Multiple Function Models
- Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
- Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
- Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
- Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
- Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
- X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
- X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
Launch X-prog3 compatible keys:
1. Original Keys (OEM keys)
2. Launch dedicated universal remote keys
3. Xhorse Autel Keydiy universal keys (generated by corresponding remote makers.)
Note:
- You can buy MCU3 Adapter to do Benz All Keys Lost and ECU TCU Reading.
- X-prog3 will program IMMO keys for German makers only. If you want to do advanced key programming, you need to Activate the Authorization of IMMO package.
- To check detail X-PROG3 Immobilizer key programming list, check list on the official website: https://qcar.x431.com/newqcar/carDes?lan=EN&swId=RESETPROG&page=1&type=3&serialName=Immo Program&area=RESET
- LAUNCH X431 X prog 3 Compatible with (X-prog 3 can't work alone) : X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Launch X431 G-3 Update Notice:
V11.00
1)Added the vehicle mode for the VW IMMO software.
2) Optimized the anti-theft system automatic identification function for the VW anti-theft software
V10.95 (Feb 28th, 2024)
Added read and write function for a total of 48 Renesas model RH850_ encryption single-chip computer.
Added readout function for 13 VW IMMO MOB instrument,
Added IMMO readout all missing function for VW, added image zooms in/out function,
Added OBD pre-process function for BMW FEM/BDC immo system.
Optimized PIN CODE, CS code and VIN code input box function, optimized file save function, optimized online backup/restore function.
Optimized read and write function for Porsche front terminal/rear terminal electrical module,
Optimized key learning. Read-out preprocessing function for BMW FEM/BDC IMMO system;
Fixed ECU read and write function for Bosch MD1XX/MG1XX SPC main control unit,
Fixed the issue of some ME17.8.8 engine ECU not connected,
Fixed the issue of some SMART/Mercedes-Benz W204/W207/W212 steering lock not start after replacement
1) Added a total of 48 RH850_encrypted single-chip machine read and write functions,
including R7F701008, R7F701011, R7F701016, R7F701021, R7F701OO9, R7F701012, R7F701017, R7F701022, R7F701026, R7F701002, R7F701010, R7F701013, R7R01018, R7F701023, R7F701027, R7F701014, R7F701019, R7F701024, R7F701028, R7F701032, R7F701040, R7F701042, R7F701044, R7F701046. R7F701050, R7F701003, R7F701015, R7F701020,R7F701025, R7F701029, R7F701033, R7F701041, R7F701043, R7F701045, R7F701047, R7F701051, R7F701030,R7F701034, R7F701048, R7F701052, R7F701054, R7F701056, R7F701006, R7F701007, R7F701049, R7F701053
2). Add a total of 13 VW IMMO MQB instrument read-out functions, including D70F3524, D70F3525_V1, D70F3525_V2, D70F3525_V3, D70F3525_V4, D70F3526_V1, D70F3526_V2, D70F3526_V3, D70F3526_V4, D70F3529, D70F3532_V1, D70F3532_V2, D70F3537
Jan. 2024.
Adds MQB calculator. Obtain sync data for free.
Need
Instrument panel CS code 16 bytes
Ecu 16 bytes CS code
Tcu 16 bytes CS code
ELV 16 bytes CS (if present)
April 2023
1. Add CAS2, CAS3/3+ IMMO system file generated key function, supported to acquire EEPROM after CAS module read and generate dealer key using EEPROM file
2.FRM module replacement, add FRM module data function, supported to download FRM module data with internet connection.
3. Adds OBD preprocessing function for BMW BDC IMMO system (program BMW BDC key via OBD)
New Software Update V10.80 (May 25th, 2023)
1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).
2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014
3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)
4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:
1) Added ECU reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added ECU reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
How To Update Launch X431 G3 Software?
The Launch X431 GIII Software Update function keeps your diagnostic software & app up-to-date, you can also use it to customize your frequently used software. As a powerful chip reading and writing device, it’s compatible with most X431 series tablets like X431 V+, X431 PAD VII, X431 PRO5, etc.
*X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection.
*To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning.
X-431 GIII Supported Car Brands:
- Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
- Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
Launch X431 xprog3 GIII Functions
- Read BMW engine ISN code.
- Read/write BMW CAS4+ and FEM chips.
- Read/write Audi fifth-generation steering column chips
- Read/write EEPROM.
- Read/write MCU.
- VW Fourth-generation Dump Mode All Keys Lost.
- Read engine in BENCH mode.
- Read gearbox data.
- Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
- Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
- Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
- Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
- Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
- Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU)
X431 XPROG3 Core Functions
- Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
- Supports the BMW CAS4/CAS4+ module replacement.
- Supports the ECU cloning and replacement for BMW Siemens engines.
- Supports ECU replacement for the fourth-generation of VW/AUDI engine;
- Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
- Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
- Erase the password for Mercedes-Benz engine and gearbox within 3S.11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
- Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
- Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
- Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Atmel |
NSC |
Fujitsu |
Philips |
Infineon |
Renesas M16 |
MC68HC05 |
Renesas M32 |
MC68HC08 |
Renesas M32R |
MC68HC11 |
Renesas M32C |
MC68HC12 |
Renesas R8C |
MediaTek |
Renesas V850 SPI |
MicroChip |
Renesas V850 UART |
Nordic |
Samsung |
ST |
SiLabs |
Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
4Wire |
GI |
Numonys |
SST |
Adesto |
GigaDevice |
OKI |
ST |
AKM |
Grundig |
ON Semi |
Toshiba |
Altera |
HOLTEK |
Other |
Winbond |
Amic |
Hynix |
PCT |
Xicor |
Atmel |
I2C |
Philips |
xUSSR |
BOSCH |
ITT |
Pioneer |
YMC |
Catalyst |
KHIC |
PMC |
Spansion |
Chings |
Macronix |
Ramtron |
SPI |
Dallas/Maxim |
MicroChip |
Rohm |
NEC |
EON |
Micron |
Samsung |
NSC |
ESMT |
MicroWire |
Seiko |
Ford |
EXEL |
Mitsubishi |
Siemens |
Fujitsu |
Fairchild |
Motorola |
Sony |
Launch X431 X-PROG vs. X-PROG3
Item
|
Launch X431 X-PROG
|
Launch X431 X-PROG3
|
Read/Write EEPROM
|
No
|
Yes
|
Read/Write MCU
|
No
|
Yes
|
Mercedes Benz Keys
|
No
|
Yes
|
Key simulator
|
No
|
Yes
|
VW 4th IMMO Dump Mode All Keys Lost
|
No
|
Yes
|
Read engine in Bench mode
|
No
|
Yes
|
VW 4th IMMO enumeration all keys lost
|
No
|
Yes
|
Read gearbox data
|
No
|
Yes
|
Read and write keys
|
Yes
|
Yes
|
Read BMW engine ISN code
|
No
|
Yes
|
Replace OBD reading component
|
Yes
|
Yes
|
Read & Write BMW CAS4+ and FEM chips
|
No
|
Yes
|
Read engine in Boot mode
|
No
|
Yes
|
Read & Write Audi 5th generation steering column chips
|
No
|
Yes
|
Launch X-Prog vs X-Prog 3 Comparison
Item Name |
X-prog |
X-Prog 3 |
EEPROM Read and Write |
× |
√ |
MCU Read and Write |
× |
√ |
Mercedes Benz Key |
× |
√ |
Key Simulator |
× |
√ |
VW 4th instrument disassembly/reading/all lost |
× |
√ |
Read Engine via Bench Mode |
× |
√ |
Read Engine via Boot Mode |
× |
√ |
VW 4th All Key Lost without Account |
× |
√ |
Read Gearbox |
× |
√ |
Read and Write Key |
√ |
√ |
Read BMW ISN |
× |
√ |
Read CAS4+/FEM Chip |
× |
√ |
Audi 5th generation steering column chip reading and writing |
× |
√ |
Replace OBD Reading Component |
√ |
√ |
Specification:
Interface |
DB26, DB15 |
Input Power |
DC12V |
Working CurrentMax |
500mA |
Power Consumption |
5W |
Storage Temperature |
-20℃~70℃ |
Working Temperature |
0℃~50℃ |
Package List:
1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual
Shipment Option and Delivery Time In OBDiitool.co.uk
1. Shipment from Shenzhen/ Hongkong warehouse
1)DHL Shipping and Other Express Service:
- Take About 5-7 working days
- DHL will be the default delivery method
- To help you clearance we will declare a lower price on the invoice to help clearance.
- If address is remote area, you need pay remote freight 35 USD or we will ship by Normal Post or Yanwen/EMS/Aramex Express.
- For some eu countries, there might be customs duty problem, if you have any special rquest on this, you can email to inform us your suggestions.
2)Yanwen Express: - Take About 7-10 working days,No Tax Problem
- Usually No Tax for European Countries or Remote Area . The tax was pre-paid, when package reached, there's no tax no extra fee for customers.
- Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you will need faster DHL shipment, please contact us ,thank you.
3)Normal Registered Airmail Post way- Take About 10-16 working days, Sometimes will be 20 days.
- Registered Airmail Includes Netherlands Post, USPS Post, Singapore Post, Hongkong Post, etc
- Order amount less than 150USD, and package weight less than 2KG will be sent by Registered airmail.
- But if you feel it is really slow, and want us to send by DHL, you can choose "Premium Delivery" and pay for the extra shipping for express service. finally we will send it by DHL.
2. UK, EU Warehouse Shipping: - UK Customers Check: Ship from UK
- EU Customers Check: Ship from Czech, it's ok to ship to all the EU countries.
- Take About 3-7 working days, Free TAX, faster shipping with cheaper price.
- If US/UK Stock was sold out, your order will be shipped from China via DHL or YANWEN(No Tax).
- Because of the UK Brexit and Pandemic, UK warehouse can't ship to other EU countries at present.
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia,5-7 DaysRoyal Mail/ DHL
After-sale service:- We can offer you lifetime customer service and tech support.
- If you have any problems, please provide error image or video to show the problem, and kindly describe it in detail;
- Technician will try their best to help you solve the problem. If there are no solutions, you can return for a refund or get a new one for replacement.
For any question, please contact us at:
- Whatsapp:+86 15980495251
- Email: Sales@OBDIItool.co.uk
- Skype: Sales@OBDIItool.co.uk
- Hot line: +86 15980495251
- Accepting bulk purchases, We can Offer you wholesale price
- We are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.
OBDiitool.co.uk OBDII tool online supplier- Accepting bulk purchases, We can Offer you wholesale price.
- OBDiitool.co.uk is a OBDII tool online supplier providing best-quality ECU chip uning tools, car diagnostic tools, OBDII Code scanners, car key programmers, heavy duty scanners, locksmith tools etc.
- Besides, we are the agent for many original brand such as Autel, Xhorse, OBDstar, VXdiag, XTOOL,Launch,CGDI, Yanhua ect.